For the heat one line is feed and one is return correct? So I could just join the two hoses and move them out of the way.
Sent from my iPhone using Tapatalk
For the heat one line is feed and one is return correct? So I could just join the two hoses and move them out of the way.
Sent from my iPhone using Tapatalk
Yeah... then make sure you run the heat for a while to bleed the air out. I'd cap off the other ends too.
Probably a quart or two in the rear lines and heater core.
Here's what you need:
http://www.theultimatejeep.com/showt...AC-Delete....?
That didn't answer my question LOL
Sent from my iPhone using Tapatalk
Not much fluid comes out at all. All I did was cut the two hoses and joined them back together and pulled them up into the engine bay
Sent from my iPhone using Tapatalk
You clear the A/C lines oK?
It did pretty much but I might look at getting them removed as well. I'm test driving right now and seem to be running about 2-4 degrees hotter then before. What the normal operating temp? Just want to make sure I have no air and no kinks in the hose I missed.
Sent from my iPhone using Tapatalk
There are currently 1 users browsing this thread. (0 members and 1 guests)