This is something I found out about the Jeepinbyal control arms when runing the supperlift lift. I've been sending emails
Back and forth about my alignment problems I've been having since installation of the upper control arms.
The a-arms were desined for a lift kit other than Superlift, SL uses a
stering knuckle extention to level out the factory a-arm. *If you add more
lift to the jeep then our a-arms will work.
To make a long story short, my camber and caster cannot be adjusted anymore
to correct my toe out problem. Corrective action will be replace my inner outer tie rods from moog.. Just an fyi
Reply With Quote