Well I shouldn't have to worry now. I have the spacers on and the pinch weld done. Now I just need the tires. I dont think I'll have them before my trail run this weekend but thats ok.
Well I shouldn't have to worry now. I have the spacers on and the pinch weld done. Now I just need the tires. I dont think I'll have them before my trail run this weekend but thats ok.
I have the same tires, and I still do rub at full lock nomatter what... I guess it's because of the nose dive-in. I think if I level it with the rear height it would be fixed, but thinking about when I load the truck, it would look like carrying an elephant on the rear and the nose up...
BTW, I also had to hammer/trim the pinch weld because it made a small cut in one of the tread wedges.
I have trimed the front bumper as Sal did, and when driving on reverse at full lock still rubs somewhere, I will have to take a better look at that...
p.s. tried to upload pic but didn't work either on IE nor Chrome...
Red, QT1, 3.7ltr, 2" Daystar lift, 1.5' Spidertrax wheel spacers, 265/70/R17 retreads, rear grab handles, front susp. skid plate, front bumper trimmed (thx to Sal's idea)
Old pics and vids (before trimming): http://www.flickr.com/photos/israselene/
With my 265/70 MT/Rs, I would have had crazy rubbing every where without doing the pinch weld mod and wheel spacers. I would have never cleared the UCA bolt and id have to drive in a straight line even if it did clear it.
2007 4.7 Liter XK | Front Modified OME HD Lift | Rear 4" Superlift | JBA UCA's | Rusty's Rear Adjustable Track Bar | Rysty’s Adjustable Upper and Lower Rear Control Arms w/Heim Joints | Mickey Thompson Classic III 17x9 Wheels | 315/70R17 Goodyear Duratracs | Airflow Snorkel | Flowmaster 40 Series Muffler | Superchips Flashpaq | Mopar Skids | 4xGuard Belly Guard | American Rebel Rear Diff Cover | Rear Powertrax No-Slip | Front Electronic Locker | Rear Heat/AC Delete
****Uwharrie Aprroved****
2006 Commander Sport- 3.7L- 4X4*Inferno Red Crystal Pearl*Rocky Road 2.25" lift *"Limited" Color-Matched Rear Grab Handles*Mopar Hitch/Harness*4xGaurd Matrix w/Fogs*Rear Bumper Lights*Tinted Front Side Markers*MHT Fuel Hostage 17x8.5 +14ET*Nitto Terra Graplers 265/70/17*
--------->My Garage<------------------
RAGE ROOF RACK MEMBER #2
Check the FAQ section for help on posting picture I would link it but I'm on my phone.
****Uwharrie Aprroved****
2006 Commander Sport- 3.7L- 4X4*Inferno Red Crystal Pearl*Rocky Road 2.25" lift *"Limited" Color-Matched Rear Grab Handles*Mopar Hitch/Harness*4xGaurd Matrix w/Fogs*Rear Bumper Lights*Tinted Front Side Markers*MHT Fuel Hostage 17x8.5 +14ET*Nitto Terra Graplers 265/70/17*
--------->My Garage<------------------
RAGE ROOF RACK MEMBER #2
Thanks! I actually did post a pic somewhere else using the forum's tool when "replying advanced mode"...I uploaded the picture and then attached it...
I will give it another try using your suggestion once I'm back home...
Red, QT1, 3.7ltr, 2" Daystar lift, 1.5' Spidertrax wheel spacers, 265/70/R17 retreads, rear grab handles, front susp. skid plate, front bumper trimmed (thx to Sal's idea)
Old pics and vids (before trimming): http://www.flickr.com/photos/israselene/
There are currently 1 users browsing this thread. (0 members and 1 guests)