I'm assuming that I need to pull the front cover over them and replace a bulb or a few bulbs. Everything seems to be in good working order other than the lights being out for the three dials. Easy to access? Is it more than (1) bulb?
I'm assuming that I need to pull the front cover over them and replace a bulb or a few bulbs. Everything seems to be in good working order other than the lights being out for the three dials. Easy to access? Is it more than (1) bulb?
That is a one piece unit that is welded shut. Plastic welded, but non user serviceable parts. Those are LEDS.
They probably are not burnt out, something is disconnected. Pull the front off the dash and remove the unit
with the lights and controls. Use a small screwdriver and pop it open. You can see inside and may be able to
replace the lights if it is truly burned out. Radio Shack will probably have the lights.
Isn't there a write-up in that "other" forum, Don?
****Uwharrie Aprroved****
2006 Commander Sport- 3.7L- 4X4*Inferno Red Crystal Pearl*Rocky Road 2.25" lift *"Limited" Color-Matched Rear Grab Handles*Mopar Hitch/Harness*4xGaurd Matrix w/Fogs*Rear Bumper Lights*Tinted Front Side Markers*MHT Fuel Hostage 17x8.5 +14ET*Nitto Terra Graplers 265/70/17*
--------->My Garage<------------------
RAGE ROOF RACK MEMBER #2
There probably is a writeup on the other forum but without searchmeister, we'll never find it.
Has the dash been apart for any reason? I would start looking for disconnected wires, but you have to
pull the bezel off first.
Seems I remember the bulbs are "wheat bulbs" which are a tiny solder-in only type bulb. You'll need a few wheat bulbs, which can be had from http://www.mouser.com/ cheap. You'll need someone with a pencil iron and skills to replace the bulbs.
Here's a few links to ''wheat bulbs"
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXYP16
http://www.hobbylinc.com/htm/mdp/mdp383.htm
http://www.scientificsonline.com/cle...eat-bulbs.html
($40 for a pack on 100)
Last edited by Adondo; 07-26-2011 at 10:06 AM.
2006, 4.7L, QTII, Toyo Wild Country M/T 265/70R17 tires, Ultrasport 175 wheels, Rocky Road 2.25'' lift kit, HID off-road lighting, Surco 50x60 roof rack, Foxwing awning, Superchips performance programming.
Wow, I wanted to get the light working behind the seat heater button, but this might be over my head.
2007 Jeep Commander: QTII, Leather, Sunroof, remote start, OEM Skid Plates, 2 in Daystar lift, 255.75.17 BFG Mud Terrains on Moabs, 1.25 " Spidertrax wheel spacers, 4x Guard front guard and Side Guards, Optima Red Top, Robbys half inch leveling spacer, Bilstein 5150 Rear Shocks, Pinch weld mod and trimming!
If its broke you have nothing to loose by trying to repair it. If you blow it up just order the new board and pop it in unless the new part is mad expensive then solder at your own risk LOL
There are currently 2 users browsing this thread. (0 members and 2 guests)