Hey started taking appart the front end to put in the spacer. My socket is not deep enough to reach the bolts on the top of the struts. Does anyone know what size that socket is so I can pick up a deep one in the morning and get this done?
Hey started taking appart the front end to put in the spacer. My socket is not deep enough to reach the bolts on the top of the struts. Does anyone know what size that socket is so I can pick up a deep one in the morning and get this done?
Last edited by Knappster; 09-01-2011 at 11:34 AM.
2007 Jeep Commander: QTII, Leather, Sunroof, remote start, OEM Skid Plates, 2 in Daystar lift, 255.75.17 BFG Mud Terrains on Moabs, 1.25 " Spidertrax wheel spacers, 4x Guard front guard and Side Guards, Optima Red Top, Robbys half inch leveling spacer, Bilstein 5150 Rear Shocks, Pinch weld mod and trimming!
I'm still at work, I will check once I get home, in case you don't have the answer yet.
PJMJR508
(Happy Jeep)
I'd buy A cheap set of deep well sockets so you can use them for other things. If you buy craftsman you get a lifetime warranty. If any ever break just take them to sears and they will directly exchange out in the store no questions asked.
2007 Commander 4.7L, QTII, OEM Towing Option, tow hooks, 2"OME + 1/4" rusty's leveling spacer, Bilstein 5150 Rear Shks, Rear sway bar removed, 4xguard front skid, Offroad Unlimited Defender Roof Rack, Hella 500FF lights, 265/70/R17 BFG KM2 M/Ts 1.5" Rough Country Wheel Spacers
http://www.theultimatejeep.com/showt...acerc-s-Garage
x2... just get a rail of deep sockets and you're set.
Home now & it is a 18mm. To much slop with a 3/4"
PJMJR508
(Happy Jeep)
2007 Jeep Commander: QTII, Leather, Sunroof, remote start, OEM Skid Plates, 2 in Daystar lift, 255.75.17 BFG Mud Terrains on Moabs, 1.25 " Spidertrax wheel spacers, 4x Guard front guard and Side Guards, Optima Red Top, Robbys half inch leveling spacer, Bilstein 5150 Rear Shocks, Pinch weld mod and trimming!
There are currently 1 users browsing this thread. (0 members and 1 guests)