Not sure if you need to know but I want to wire the lights to a rocker switch in the cab, I don't want to run them off my headlights or anything like that.
Not sure if you need to know but I want to wire the lights to a rocker switch in the cab, I don't want to run them off my headlights or anything like that.
2005 WK - MY GARAGE
Most light kits will have everything you need, but if you are buying separately you will need the lights, wire, switch AND a resister.
2006 XK Limited, 5.7L Hemi
Dark Khaki, QDII, Rocky Road 2.25" lift, Steel Armadillo front bumper with Warn PowerPlant winch, Steel Armadillo rear bumper w/ tire carrier, Rock Sliders, Light Bar & Front Fender Tube Fenders, 4xGuard belly skid plate & rear differential guard, BFG M/T A/T 255/75R17s on Rubicon rims, Spidertrax 1.5 inch wheel spacers, Rhino Rack Pioneer Tray with FoxWing Awning, Superchips VIVID Programmer, Air Flow snorkel, Steel Armadillo Secure Console, Cobra CB Radio, Lock Pick Video Programmer, ASFIR Skid Plates.
Knappster's Garage
AKA: the Owner of The Steel Armadillo L.L.C.
This is the KIT I'm going to order. It comes with:
2 12V/55W halogen driving beam lamps
2 white protective stone shields with Hella logo
2 H3 12V/55W bulbs
1 complete plug and play wiring harness
1 illuminated switch
1 relay
Universal mounting hardware
Step-by-step mounting instructions
Will I need anything else?
2005 WK - MY GARAGE
looks like that kit will have everything you need. Most important factor is making sure you're running the lights off of the relay and you're using the switch to activate the relay. The instructions should spell it out pretty good.
Don't know if you have the stock fogs installed or not. If you don't have them you can borrow the stock fog light wiring that is sitting under the bumper and lengthen it a little bit. Then find the fuse/relay set that services that wiring and run your own switch so you won't have to spend the extra on the steering column stalk/getting it activated/only being available with the rest of the lights on. That's probably what i'd do. What's for sure is if you start wiring it and run into problems give the forum guys a shout and we'll walk you through it. I just put the 500FFs on mine love em but want to add 2 regular 500 driving to the outside as well.
2007 Commander 4.7L, QTII, OEM Towing Option, tow hooks, 2"OME + 1/4" rusty's leveling spacer, Bilstein 5150 Rear Shks, Rear sway bar removed, 4xguard front skid, Offroad Unlimited Defender Roof Rack, Hella 500FF lights, 265/70/R17 BFG KM2 M/Ts 1.5" Rough Country Wheel Spacers
http://www.theultimatejeep.com/showt...acerc-s-Garage
I don't have the stock fogs installed at the moment, but I have them sitting here in my living room. I'm installing those, front tow hooks, and hopefully the Hella's next weekend. Just nervous about trying to wire up the Hellas lol.
2005 WK - MY GARAGE
Does this diagram seem correct? I've seen some that have a 30amp inline fuse between the relay and the battery I believe? Will I need that also?
Last edited by ItsMeKO3; 10-17-2011 at 07:18 AM.
2005 WK - MY GARAGE
There are currently 1 users browsing this thread. (0 members and 1 guests)