here it is on the ground with the rear end mostly mocked up, i still need to triangulate the suspension and mount the air bag.





then on to the front... i was going to cut out the center section of the sammi front axle and put a straight tube and just re use the front knuckles, but as i was mocking it up (yes i know the axle is backwards in the pix) i kinda liked the 3rd member there to give it that pseudo 4x4 look. my original plan was for a mono-leaf up front like in the pictures i put together in .cad - but i didn't like the reality of it. so i did a quarter eliptical suspension with control arms. the control arms are half of front upper control arms from a jeep JK sleeved with DOM and a heim joint at the other end, it works better than i expected.









wingnut & dipstick helping out as usual