Tools need 18mm and 10mm socket
Right panel
Left panel
Tools need 18mm and 10mm socket
Right panel
Left panel
2006 XK Limited, 5.7L Hemi
Dark Khaki, QDII, Rocky Road 2.25" lift, Steel Armadillo front bumper with Warn PowerPlant winch, Steel Armadillo rear bumper w/ tire carrier, Rock Sliders, Light Bar & Front Fender Tube Fenders, 4xGuard belly skid plate & rear differential guard, BFG M/T A/T 255/75R17s on Rubicon rims, Spidertrax 1.5 inch wheel spacers, Rhino Rack Pioneer Tray with FoxWing Awning, Superchips VIVID Programmer, Air Flow snorkel, Steel Armadillo Secure Console, Cobra CB Radio, Lock Pick Video Programmer, ASFIR Skid Plates.
Knappster's Garage
AKA: the Owner of The Steel Armadillo L.L.C.
Right behind the middle nut you show to be removed I had another really long bolt that had to come out as well. It's for the seat belts.
and those suckers are tight all the way out!
I think the factory must use Loctite Red, especially on seat belt bolts. I used a rattle gun, and it hammered away down to the least thread on every bolt. I imagine it was a major PITA with a manual ratchet wrench.
2006, 4.7L, QTII, Toyo Wild Country M/T 265/70R17 tires, Ultrasport 175 wheels, Rocky Road 2.25'' lift kit, HID off-road lighting, Surco 50x60 roof rack, Foxwing awning, Superchips performance programming.
There are currently 1 users browsing this thread. (0 members and 1 guests)