Uwharrie Trip / November 11-13, 2011

[criket]

ANd that's pretty much it. Again, I had an awesome time and got to hang with some cool people. I can't wait to go back.

[Sal-XK]

There were a lot great rigs out there today we saw a little bit of everything.

[pjmjr508]

Looks like it was a blast!!!!!!!!

[AJeepZJ]

Looked awesome. Nice Jeeps. I'm not sure why the trackbar bolts on the side like to come loose after a good day's wheeling - If i could speculate, you may want to look into upgrading the steering damper at some point for the XJ. It was among my top things to do in additino to a front bumper, and rear tire carrier.

[Sal-XK]

Looked awesome. Nice Jeeps. I'm not sure why the trackbar bolts on the side like to come loose after a good day's wheeling - If i could speculate, you may want to look into upgrading the steering damper at some point for the XJ. It was among my top things to do in additino to a front bumper, and rear tire carrier.

I put two grad 8 bolts in that bracket with lock washers and they worked them selves loose. Now I'm going to double nut them with some lock tight and if that don't hold I'll weld the thing in place.

[Matt]

Awesome pictures guys!!!

Glad to see you guys got to wheel with Ryan

[Sal-XK]

Awesome pictures guys!!!

Glad to see you guys got to wheel with Ryan

I take it you know that guy? I don't think we talked to him but his jeep did catch our attention

[Matt]

I take it you know that guy? I don't think we talked to him but his jeep did catch our attention

Yup. That's the guy i know that works at eastcoasttires.com.

Great guy... if you see him out there you should chat it up. He'd make a great wheeling buddy

[criket]

^He had a very nice jeep. It looked well built.

Sal, you know you could at least tack weld the bolt heads in place. That way if you ever had to tighten it again, you'd only need a 9/16 wrench.

Oh and btw guys, Sal only brought one little screw driver with him on this trip. And he used it to replace the line that popped off on his way to URE. That was hilarious.

[AJeepZJ]

^He had a very nice jeep. It looked well built.

Sal, you know you could at least tack weld the bolt heads in place. That way if you ever had to tighten it again, you'd only need a 9/16 wrench.

Oh and btw guys, Sal only brought one little screw driver with him on this trip. And he used it to replace the line that popped off on his way to URE. That was hilarious.

Haven't you heard? A screw driver is Sal's right hand tool. He can use it to fix a Jeep and he knows 15 different ways to kill a man with it. A screw driver is ALL he needs.