I picked up a light duty model from Northern Tool for about 150. It's a 110V 125AMP model flux core. I won't be doing anything heavy duty just minor repairs and such. Just got it a few days ago so I can't tell about it's abilities just yet. Hobart and miller seem nice but somewhat pricey.
2007 Commander 4.7L, QTII, OEM Towing Option, tow hooks, 2"OME + 1/4" rusty's leveling spacer, Bilstein 5150 Rear Shks, Rear sway bar removed, 4xguard front skid, Offroad Unlimited Defender Roof Rack, Hella 500FF lights, 265/70/R17 BFG KM2 M/Ts 1.5" Rough Country Wheel Spacers
http://www.theultimatejeep.com/showt...acerc-s-Garage
I need to weld a broken piece of sheet steel on my mower deck. I have a AC/DC Lincoln stick welder. I've welded thick mild steel but never sheet metal. Any suggestions for using my stick welder on it? I don't want to buy another welder.
2007 XK Limited, 5.7L Hemi, QDII, Rusty's 2" lift, Spidertrax 1.5 inch wheel spacers, GetLost4x4's front hitch mount for portable winch.GY Duratracs 265/70R17s, Rola Roof Rack.
Stick welders are tough to use well on really thin metals. You will need to turn it down quite a bit. I would think a mower deck would be thicker steel though. The mower decks I've seen are pretty thick at least.
2007 Commander 4.7L, QTII, OEM Towing Option, tow hooks, 2"OME + 1/4" rusty's leveling spacer, Bilstein 5150 Rear Shks, Rear sway bar removed, 4xguard front skid, Offroad Unlimited Defender Roof Rack, Hella 500FF lights, 265/70/R17 BFG KM2 M/Ts 1.5" Rough Country Wheel Spacers
http://www.theultimatejeep.com/showt...acerc-s-Garage
Thanks guys, it is actually a safety cover on the deck that covers the belt. It's thinner than the steel used for the actual deck. I'll have to get some smaller rods and turn it down. My welder is pretty old and doesn't reference metal thickness but does say what settings to use for certain brands and rod thicknesses. I'll give it a try and see if I can do it. I just don't want to burn through it.
2007 XK Limited, 5.7L Hemi, QDII, Rusty's 2" lift, Spidertrax 1.5 inch wheel spacers, GetLost4x4's front hitch mount for portable winch.GY Duratracs 265/70R17s, Rola Roof Rack.
There are currently 1 users browsing this thread. (0 members and 1 guests)