Aluminum
Stainless steel
2007 Commander 4.7L, QTII, OEM Towing Option, tow hooks, 2"OME + 1/4" rusty's leveling spacer, Bilstein 5150 Rear Shks, Rear sway bar removed, 4xguard front skid, Offroad Unlimited Defender Roof Rack, Hella 500FF lights, 265/70/R17 BFG KM2 M/Ts 1.5" Rough Country Wheel Spacers
http://www.theultimatejeep.com/showt...acerc-s-Garage
Honestly I think the best route for the XK snorkle is to utilize the desige of the H1. A short hood snorkle would be really cool and east to make.
2007 Jeep Commander: QTII, Leather, Sunroof, remote start, OEM Skid Plates, 2 in Daystar lift, 255.75.17 BFG Mud Terrains on Moabs, 1.25 " Spidertrax wheel spacers, 4x Guard front guard and Side Guards, Optima Red Top, Robbys half inch leveling spacer, Bilstein 5150 Rear Shocks, Pinch weld mod and trimming!
'07 Commander 3.7 V6
2" Rough Country Lift with Vision Warriors and Goodyear Duratracs 245/75R17
BajaRack Mega-Mule with KC Daylighters
http://s624.photobucket.com/albums/t...cpZZ1QQtppZZ20
2007 Jeep Commander: QTII, Leather, Sunroof, remote start, OEM Skid Plates, 2 in Daystar lift, 255.75.17 BFG Mud Terrains on Moabs, 1.25 " Spidertrax wheel spacers, 4x Guard front guard and Side Guards, Optima Red Top, Robbys half inch leveling spacer, Bilstein 5150 Rear Shocks, Pinch weld mod and trimming!
2007 Jeep Commander: QTII, Leather, Sunroof, remote start, OEM Skid Plates, 2 in Daystar lift, 255.75.17 BFG Mud Terrains on Moabs, 1.25 " Spidertrax wheel spacers, 4x Guard front guard and Side Guards, Optima Red Top, Robbys half inch leveling spacer, Bilstein 5150 Rear Shocks, Pinch weld mod and trimming!
I was looking at this idea last year I'm sure there is thread on it somewhere LOL. It can't be done without cutting the hood and you can't go into the piece next to the window because thats where the HVAC system draws it air from. Then there was the issue of space in that sections of under the hood. No filter could be used in there so the filter would have to be outside which also caused a design problem. It can be done anything can be done I just ran into to many problems that the cure was more then I wanted to do or had the skill to do. I'm all ears on all ideas if you can figure a way to do it I would diffidently take a look.
love to see you come up with Sal.
PJMJR508
(Happy Jeep)
Ryan ---- 2006 WK 4.7 QDII <- Click for Garage
2.25" RR Lift - Front Bilstiens - Rear OMEs - 32" Wildpeaks - Saguaro 4x Shackles - Tail Light Guards - AFE intake - Rola - Exhaust
Twitter Facebook ---- Chive On
There are currently 1 users browsing this thread. (0 members and 1 guests)