I still don't see it, I just see the two pieces the connect the fender flare so I guess XKs and WK's might be different.
I still don't see it, I just see the two pieces the connect the fender flare so I guess XKs and WK's might be different.
oh ok, sorry man.
SOLD - 2005 | WK | Khaki | 3.7 | QT1 | OME HD Front Struts | Rusty's 2" lift in Rear w/ Monroe load levelers (F150 version) | 265/70 Nitto Terra Grapplers | 17" Moabs | 1.5" wheel spacers | Pinch weld mod | Rear fender trim mod | 4xG Matrix w/ reciever hitch | 4xG Belly guard | SOLID Diff cover | Cobra CB radio | 4xG CB radio antenna mount
Pretty sure that piece slides and comes out..
Here is an install guide for the factory hitch.
This shows you how to remove the bumper.
Hitch Install Guide
Well it was just those two holding it on.. I had to pull the center part out and then I removed the whole fastener. Both JustforJeeps and JeepDex install instructions for the hitch are incorrect in their illustrations of what holds the bumper on.
No, jeepdex wasnt wrong. The illustration may be wrong, But Jeepex is NEVER wrong.
That is the illustration provided by Jeep. Jeep may be wrong.
The pic you have, that is just a slide. I took mine out but I found out I didnt have to. Once the fasteners slide the bumper back and it will drop down.
There are currently 1 users browsing this thread. (0 members and 1 guests)