Those are cool too. Id like to do the auxiliary version in the bumper so I could run them on a separate circuit and use them when in park (and drive! Lol damn tailgaters)
Those are cool too. Id like to do the auxiliary version in the bumper so I could run them on a separate circuit and use them when in park (and drive! Lol damn tailgaters)
SOLD - 2005 | WK | Khaki | 3.7 | QT1 | OME HD Front Struts | Rusty's 2" lift in Rear w/ Monroe load levelers (F150 version) | 265/70 Nitto Terra Grapplers | 17" Moabs | 1.5" wheel spacers | Pinch weld mod | Rear fender trim mod | 4xG Matrix w/ reciever hitch | 4xG Belly guard | SOLID Diff cover | Cobra CB radio | 4xG CB radio antenna mount
I have aux revers lights on the rack that I can use too, but for day to day backing up these things are awesome and they only cost $40. Here's a night shot with a garage door about 15' behind me.
Here is a link to my build thread on JG where I did a quick write up on them:
http://www.jeepgarage.org/showthread.php?p=579356
Last edited by Omelet; 02-26-2012 at 03:15 PM.
[05 WK Khaki 4x4 5.7L QDII ][ 5" SL (OME HD coils and struts) ][ 295/70/17 Nitto Trail Grapplers on 17" Moabs (for the daily grind) ][ 35x12.50R17LT BFG MT KR (for wheeling) ][ Hidden Superwinch in stock bumper][ And soooooo much more... ]
Thanks! Those look like a good addition regardless of auxiliary lighting or not!
That is real nice thats just the bulb plug into the stock housing correct? I'm digging it it's added to my list!
You are welcome guys! Every Jeep should have revers lights like these. And yes they just plug into the revers socket.
[05 WK Khaki 4x4 5.7L QDII ][ 5" SL (OME HD coils and struts) ][ 295/70/17 Nitto Trail Grapplers on 17" Moabs (for the daily grind) ][ 35x12.50R17LT BFG MT KR (for wheeling) ][ Hidden Superwinch in stock bumper][ And soooooo much more... ]
I just found some on ebay and placed an order. Can't wait. I like bright back up lights.
07 5.7L, loaded, QDII, RR 2.25lift, Spider trax 1.5", Weston bull bar
Nathan, what about the brake and signal for the stock housing units? I probably wont tap the HID reverses - at least not untill I finish at least upgrading the remaining bulbs to LEDs. There a specific vendor you were pleased with that you ordered from on Ebay or Amazon?
AJ I am not sure. I have aftermarket LED housings, but they use the stock revers wiring and socket. The seller on eBay that I bought from doesn't have any left, I bought his only set.
[05 WK Khaki 4x4 5.7L QDII ][ 5" SL (OME HD coils and struts) ][ 295/70/17 Nitto Trail Grapplers on 17" Moabs (for the daily grind) ][ 35x12.50R17LT BFG MT KR (for wheeling) ][ Hidden Superwinch in stock bumper][ And soooooo much more... ]
looks great,I want to do this
PJMJR508
(Happy Jeep)
There are currently 1 users browsing this thread. (0 members and 1 guests)