Well if you need help with the parts list, let me know!
2006 XK Limited, 5.7L Hemi
Dark Khaki, QDII, Rocky Road 2.25" lift, Steel Armadillo front bumper with Warn PowerPlant winch, Steel Armadillo rear bumper w/ tire carrier, Rock Sliders, Light Bar & Front Fender Tube Fenders, 4xGuard belly skid plate & rear differential guard, BFG M/T A/T 255/75R17s on Rubicon rims, Spidertrax 1.5 inch wheel spacers, Rhino Rack Pioneer Tray with FoxWing Awning, Superchips VIVID Programmer, Air Flow snorkel, Steel Armadillo Secure Console, Cobra CB Radio, Lock Pick Video Programmer, ASFIR Skid Plates.
Knappster's Garage
AKA: the Owner of The Steel Armadillo L.L.C.
I'm going to see what all Kurt sent me once it arrives and go from there. He said he threw a bunch of extra parts in the box so with a little creative thinking and a trip to the parts so and i'll be set! I'll be in contact with you once its installed so I can pick your brain about the antenna relocation. I want to mount it on the driver's side like you did.
2007 4.7 Liter XK | Front Modified OME HD Lift | Rear 4" Superlift | JBA UCA's | Rusty's Rear Adjustable Track Bar | Rysty’s Adjustable Upper and Lower Rear Control Arms w/Heim Joints | Mickey Thompson Classic III 17x9 Wheels | 315/70R17 Goodyear Duratracs | Airflow Snorkel | Flowmaster 40 Series Muffler | Superchips Flashpaq | Mopar Skids | 4xGuard Belly Guard | American Rebel Rear Diff Cover | Rear Powertrax No-Slip | Front Electronic Locker | Rear Heat/AC Delete
Jon, I think it would be great if SA had an affordable snorkel to sell us. I was looking at my friends snorkel for his JK and it really does not look hard to make at all. I think it would be easier then making sliders. IMO
2006 XK Limited, 5.7L Hemi
Dark Khaki, QDII, Rocky Road 2.25" lift, Steel Armadillo front bumper with Warn PowerPlant winch, Steel Armadillo rear bumper w/ tire carrier, Rock Sliders, Light Bar & Front Fender Tube Fenders, 4xGuard belly skid plate & rear differential guard, BFG M/T A/T 255/75R17s on Rubicon rims, Spidertrax 1.5 inch wheel spacers, Rhino Rack Pioneer Tray with FoxWing Awning, Superchips VIVID Programmer, Air Flow snorkel, Steel Armadillo Secure Console, Cobra CB Radio, Lock Pick Video Programmer, ASFIR Skid Plates.
Knappster's Garage
AKA: the Owner of The Steel Armadillo L.L.C.
You have one its attached to your Jeep! LMAO I guess if you still need plans when I'm done with mine you can have it. But I won't be making mine for a while. I plan on making mine with square edges though nothing fancy just going to match the lines of the XK as good as I can. Form what I can tell one sheet metal will do the trick. Cut out the 4 sides weld together
My Airflow snorkel is still sitting on a shelf in my garage... I lost the template to mark and cut the fender. If anyone has a line on where to get that template, please let me know! I sent an email off to [email protected] when I discovered this thread moments ago.
CSH
if it ain't broke, fix it until it is!
Its funny because one of the things missing from the Air Flow snorkel I scored for $100 is the template. I think I can make my own template with a little creative thinking. If everything works out ill send it to you. One way or another my snorkel is going on the XK Friday night!
2007 4.7 Liter XK | Front Modified OME HD Lift | Rear 4" Superlift | JBA UCA's | Rusty's Rear Adjustable Track Bar | Rysty’s Adjustable Upper and Lower Rear Control Arms w/Heim Joints | Mickey Thompson Classic III 17x9 Wheels | 315/70R17 Goodyear Duratracs | Airflow Snorkel | Flowmaster 40 Series Muffler | Superchips Flashpaq | Mopar Skids | 4xGuard Belly Guard | American Rebel Rear Diff Cover | Rear Powertrax No-Slip | Front Electronic Locker | Rear Heat/AC Delete
Here are a few pictures from the snorkel install. I have a bunch more on my phone that I have to down load to my computer. Ill try to get them posted in the next few hours.
Airbox complete.
3 inch I.D. heavy duty flexible hose coming off the snorkel down the inner fender well.
3.5 inch O.D. to 3 inch O.D adapter my buddy fabbed up for me to connect the hose from the snorkel to the hose from the airbox.
Everything hooked up. I got a little carried away with the Silicone....lol
Last edited by 07JeepXK; 03-04-2012 at 12:57 PM.
2007 4.7 Liter XK | Front Modified OME HD Lift | Rear 4" Superlift | JBA UCA's | Rusty's Rear Adjustable Track Bar | Rysty’s Adjustable Upper and Lower Rear Control Arms w/Heim Joints | Mickey Thompson Classic III 17x9 Wheels | 315/70R17 Goodyear Duratracs | Airflow Snorkel | Flowmaster 40 Series Muffler | Superchips Flashpaq | Mopar Skids | 4xGuard Belly Guard | American Rebel Rear Diff Cover | Rear Powertrax No-Slip | Front Electronic Locker | Rear Heat/AC Delete
Looking good man!
Sent from my iPhone using Tapatalk
There are currently 2 users browsing this thread. (0 members and 2 guests)