Your rig is looking great
Your rig is looking great
PJMJR508
(Happy Jeep)
SOLD - 2005 | WK | Khaki | 3.7 | QT1 | OME HD Front Struts | Rusty's 2" lift in Rear w/ Monroe load levelers (F150 version) | 265/70 Nitto Terra Grapplers | 17" Moabs | 1.5" wheel spacers | Pinch weld mod | Rear fender trim mod | 4xG Matrix w/ reciever hitch | 4xG Belly guard | SOLID Diff cover | Cobra CB radio | 4xG CB radio antenna mount
Garage Update: I finshed all the overhead light fixtures this morning. I also put up the receptacle covers everywhere except on 2: The 220 volt and one where I need to trim the cover a little to get it to fit. Alas, there are no more wires hanging except where the breaker box goes. That is next
Also went out for a little photoshoot with the WK. Nothing spectacular, just wanting to show you guys how it sits now.
Front: OME HD Front struts and springs
Rear: 2" spacer lift, Factory springs, Monroe Load Levelers F150 version.
SOLD - 2005 | WK | Khaki | 3.7 | QT1 | OME HD Front Struts | Rusty's 2" lift in Rear w/ Monroe load levelers (F150 version) | 265/70 Nitto Terra Grapplers | 17" Moabs | 1.5" wheel spacers | Pinch weld mod | Rear fender trim mod | 4xG Matrix w/ reciever hitch | 4xG Belly guard | SOLID Diff cover | Cobra CB radio | 4xG CB radio antenna mount
It's a lot more level now. I'm sure you are enjoying this a lot more.
SOLD - 2005 | WK | Khaki | 3.7 | QT1 | OME HD Front Struts | Rusty's 2" lift in Rear w/ Monroe load levelers (F150 version) | 265/70 Nitto Terra Grapplers | 17" Moabs | 1.5" wheel spacers | Pinch weld mod | Rear fender trim mod | 4xG Matrix w/ reciever hitch | 4xG Belly guard | SOLID Diff cover | Cobra CB radio | 4xG CB radio antenna mount
WK update: I saw AJ's step pad mod and thought I'd give mine a try. After dragging numerous things over this step pad it had several deep scratches. So here is what I wanted to cover up a little bit. I used spray on bed liner (cheap stuff but that's ok with me. I know how to do it right with more expensive stuff later).
So here is the rest of the after pics.
I also worked on a couple of side projects.
Me and my wife are expecting a boy in mid June so I have to get his toys ready. First up is my old pedal tractor.
I painted the trailer and bed lined the inside.
SOLD - 2005 | WK | Khaki | 3.7 | QT1 | OME HD Front Struts | Rusty's 2" lift in Rear w/ Monroe load levelers (F150 version) | 265/70 Nitto Terra Grapplers | 17" Moabs | 1.5" wheel spacers | Pinch weld mod | Rear fender trim mod | 4xG Matrix w/ reciever hitch | 4xG Belly guard | SOLID Diff cover | Cobra CB radio | 4xG CB radio antenna mount
Looks like you did a good job man cool.
Sent from my iPad using Tapatalk HD
The next little side project for our son is my old Radio Flyer wagon. I plan to do the same thing to it, paint it red and bed line the inside. I can't find these original stickers online anywhere but there is a custom graphics shop near my house so I'll go there and have some made.
And that's about it for today. Oh I did replace my tail lights as one was burned out. No pics as that was the easiest bulb replacement I have ever done.
SOLD - 2005 | WK | Khaki | 3.7 | QT1 | OME HD Front Struts | Rusty's 2" lift in Rear w/ Monroe load levelers (F150 version) | 265/70 Nitto Terra Grapplers | 17" Moabs | 1.5" wheel spacers | Pinch weld mod | Rear fender trim mod | 4xG Matrix w/ reciever hitch | 4xG Belly guard | SOLID Diff cover | Cobra CB radio | 4xG CB radio antenna mount
Well done - everything turned out great.
There are currently 1 users browsing this thread. (0 members and 1 guests)