I was driving to work yesterday and noticed a very high pitch squeak sound coming from the rear of my commander. It only happens when i get up to 2000 RPM's and goes away when the jeep shifts to the next gear. Any ideas it is very annoying.
I was driving to work yesterday and noticed a very high pitch squeak sound coming from the rear of my commander. It only happens when i get up to 2000 RPM's and goes away when the jeep shifts to the next gear. Any ideas it is very annoying.
That's strange..... you sure it was the rear of the Jeep? Things back there usually depend on vehicle speed as opposed to engine RPM. Can you recreate the sound? Was your AC on? Could have been a combination of AC compressor engagement and alternator load resulting in some belt squeal.
Also check the trans fluid for level, color and smell.
Cool thanks and my AC was not on. All of my fluids are good. IT almost sounds like the sound you get when you have dust in your breaks, but does not go away tell it shifts.
Hows your rear pinion seal? It could be that.
My suggestion, is to put your jeep on a lift and asee if you or a buddy can put it in gear and repeat it. I had to do that when my t-case was whining. It turned out that it needed a fluid change, lol.
SOLD - 2005 | WK | Khaki | 3.7 | QT1 | OME HD Front Struts | Rusty's 2" lift in Rear w/ Monroe load levelers (F150 version) | 265/70 Nitto Terra Grapplers | 17" Moabs | 1.5" wheel spacers | Pinch weld mod | Rear fender trim mod | 4xG Matrix w/ reciever hitch | 4xG Belly guard | SOLID Diff cover | Cobra CB radio | 4xG CB radio antenna mount
Shooting in the dark here, BUT, could it be your parking brake???
SOLD - 2005 | WK | Khaki | 3.7 | QT1 | OME HD Front Struts | Rusty's 2" lift in Rear w/ Monroe load levelers (F150 version) | 265/70 Nitto Terra Grapplers | 17" Moabs | 1.5" wheel spacers | Pinch weld mod | Rear fender trim mod | 4xG Matrix w/ reciever hitch | 4xG Belly guard | SOLID Diff cover | Cobra CB radio | 4xG CB radio antenna mount
Well i know its not engaged but the assembly could be bad i will look at that tonight.
Did you ever figure out what the squeak was? If so, I'd like to know for future reference. Thanks.
SOLD - 2005 | WK | Khaki | 3.7 | QT1 | OME HD Front Struts | Rusty's 2" lift in Rear w/ Monroe load levelers (F150 version) | 265/70 Nitto Terra Grapplers | 17" Moabs | 1.5" wheel spacers | Pinch weld mod | Rear fender trim mod | 4xG Matrix w/ reciever hitch | 4xG Belly guard | SOLID Diff cover | Cobra CB radio | 4xG CB radio antenna mount
There are currently 1 users browsing this thread. (0 members and 1 guests)