Quote Originally Posted by Omelet View Post
You are looking at it wrong. I guess I should have lines up the LCA and unit bearing location instead. If you look at the location between where the unit bearing/axle would be and the tie rod mount on the OEM one compared to the SL, you will see they moved the tie rod mount up a few inches. They also extended the mounting location for the UCA. Since they dropped the diff and LCA mounts on the Jeep they had to extend the length between the upper and lower control arm mounts to match the new suspension geometry. Since the rack did not move they raised the tie rod mount up farther on the spindle to realign the steering with the new suspension geometry. So even though the rack was not lowered, the steering is still aligned because of the new spindles. Moving the rack would not be a fix but only serve to screw up the geometry. Does that make sense? It does in my head at least
Exactly... What he said!