I wish I could say the same! My flare's didnt pop off, however I still have slight rubbing in the rear with the 33's. If only the spacers were 1/4 inch taller id set. be
I wish I could say the same! My flare's didnt pop off, however I still have slight rubbing in the rear with the 33's. If only the spacers were 1/4 inch taller id set. be
2007 4.7 Liter XK | Front Modified OME HD Lift | Rear 4" Superlift | JBA UCA's | Rusty's Rear Adjustable Track Bar | Rysty’s Adjustable Upper and Lower Rear Control Arms w/Heim Joints | Mickey Thompson Classic III 17x9 Wheels | 315/70R17 Goodyear Duratracs | Airflow Snorkel | Flowmaster 40 Series Muffler | Superchips Flashpaq | Mopar Skids | 4xGuard Belly Guard | American Rebel Rear Diff Cover | Rear Powertrax No-Slip | Front Electronic Locker | Rear Heat/AC Delete
Found another idea which killed 2 birds the other day, was at the local BCF and came across some boat trailer rollers, perfect diameter, made from poly with a harder plastic centre for 10mm bolt. Can cut to size with a hacksaw, and only 7 bucks each. Worked really well for a longer XJ front bumpstop too ;-)
2007 WH Grand Cherokee CRD QDII - 3" Exhaust, GDE Flash Tune, CRDSTU Hybrid Lift & bash Plates, 4xGuard Rock Rails & Rear Sliders, Saguaro F&R Bars, Warn 9.5CTI-s, AEV Saverge Rims, 35" KM2's, Snorkel, Custom Rear Drawers, ARB Dual Compressor + On Board Air, BullyDog Monitor, Dual Optimas Front and Dual Rear Aux Batteries YouTube Vids
There are currently 1 users browsing this thread. (0 members and 1 guests)