Now I needed to find a place to mount my speakers. I had just picked up a pair of new MLS-100’s and would use my old M/A Com speaker. I decided to mount them on my “B” posts. Two would be on the driver’s side so I could hear them easier.. …Hugh ? What did you say ??? ( been around jet noise way to long !).
I installed the other one on the passenger side.
I found a screw behind the small panel towards the top of the pillar.
I used a magnetized screw driver and very carefully removed the screw ( I put a small piece of tape on them when I re-installed them). If it drops behind the panel, you end up pulling a lot more and leaning how other things are mounted that you really didn’t want to know or care about. Or so I’ve heard!! Ya..
I pulled the rubber trim off and gently pulled the plastic molding out. I marked my holes for the speaker mounts and used SS bolts and lock washers, to attach them.
I trimmed a few of the plastic “fins” on the inside of the panel to make it easier to route the speaker wire.
……..rubber trim piece reinstalled…