i have been researching this for awhile...
i have saw on another site where i guy was going to use a zj fuel cell. i was just wondering as to what all i would need to get doing this as well?
what i would like to do is find out if i would be able to cut out an area next to the where the fuel tank filler is? maybe mount a gauge next to it as well?
i would like to use an external pump so that i could just fill my primary tank as needed?
so what else do need to get before i get into this?
1. fuel cell
2. filler hose
3. jeep wrangler fuel housing ( the cap and housing that goes around it?)
4. do i need to do something about ventilation?
5. fuel gauge? how would i go about wiring this up to show how much is in the tank?
assuming that theres 2 hose opening on the cell? i was thinking of using one to fill it and the other to mount another hose to the pump to fill the primary tank.
would it be simple to add a gauge to this? getting a sending unit is what this would connect to?
im thinking i would like to make this my next project...
any help would greatly be appreciated....
thanks