Would love to see the options that are out there, I hate having my spacers on..
I know AEV's fit with no issue, any others?
Of course the pre-requisite is running bigger tires
Would love to see the options that are out there, I hate having my spacers on..
I know AEV's fit with no issue, any others?
Of course the pre-requisite is running bigger tires
Ryan ---- 2006 WK 4.7 QDII <- Click for Garage
2.25" RR Lift - Front Bilstiens - Rear OMEs - 32" Wildpeaks - Saguaro 4x Shackles - Tail Light Guards - AFE intake - Rola - Exhaust
Twitter Facebook ---- Chive On
I run 245/75/17 DuraTracs with OEM wheels with rub only at full lock. I will probably get new wheels with different offset before I run spacers. I rarely full lock so I don't see it as an issue at the moment. I thought with the large tread I'd hit the ball joint bolt but it doesn't touch it.
I'm not running spacers. There are quite a few wheels that will fit... the key is getting the optimal width and backspace.
8-8.5" wide and 5-5.5" backspace combinations are what you want to look for. As you get into the 4.5" backspace or 9" width range you start to run into rubbing issues, primarily with the wider wheels because then you cant run thinner tires to compensate.
Last edited by Matt; 08-28-2012 at 09:49 AM.
If you have a few bucks to spend, Walker Evans makes some nice wheels that'll work. Otherwise just search the standard wheel stores for AR, MB, etc brand wheels with the necessary specs.
I do NOT run wheel spacers. I ran Firestone Destinations AT 255/70/17 on Hulk rims for over three years. I just recently replaced those with Falken Wild Peaks AT 265/65/17 still on the Hulk rims. Neither rub anywhere or at anytime. I have a 2" lift.
Sorry Guys,I should have been more specific - Tire size at 255/75 or 265/70 M/T's at a minimum. Im not going smaller tires when its time to get new ones.
The issue I have is the caliper as well as the rubbing.
Ryan ---- 2006 WK 4.7 QDII <- Click for Garage
2.25" RR Lift - Front Bilstiens - Rear OMEs - 32" Wildpeaks - Saguaro 4x Shackles - Tail Light Guards - AFE intake - Rola - Exhaust
Twitter Facebook ---- Chive On
My Wheels are 18X9 5.71 back space and +18mm Offset. No spacers. With 4" Lift and pinch weld mods, no problems so far... but not much room to spare !
2010 Limited > 5.7 > Pearl Black > QDII > 4" Superlift w-SSR > Bilstein HD Struts + 1/4" spacer > RCV cv Axles > JBA 6" Springs + Matt's 1/2" Spacer > BDS adj LCA > 285-65-18 Nitto Trail Grappler MT's > Moto Metal 951 > K&N CAI > Flowmaster 50 > 4xGuard-Front/Belly skids + Grill Hoop w/ Front Receiver + Rear Diff. Guard > PIIA 520 ATP > Front Camera > Steel Armadillo's Rear Bumper/Tire/ Blitz Carrier/Super Sliders +Secure Console > Dual Batteries > OBA > JKS Rear-JBA Front Discos > FlashPaq
Wheel combinations you want to look at:
8" wide with 5-5.5" backspace
8.5" wide with 5.5" backspace
Deviations will depend on the level of trimming/rubbing/etc you think is acceptable for your intended driving/wheeling.
Thats also what I was looking for and 285 X 60 's.
But with 18" I was limited to my selection on wheels and tires. Every time I found a wheel I liked with that spec it was discontinued. Happened 3 times. So ended up with my 4th choice and 65's.
The back space and tire ratio I ended up, I knew both where pushing the limits.... Oh Well ... My Luck... but it has worked better than I was expecting.
Oh also, just FYI for anyone looking at any wheel tire combos... here is a Link to a cool wheel-tire calculator. You can put in your stock spec's and then see what happens with other combos. http://www.rimsntires.com/specs.jsp
Last edited by 1USMC; 08-28-2012 at 01:50 PM.
Yeah its a PITA trying to find wheels in the specs we need.
Fyi here's a cooler link:
http://www.theultimatejeep.com/showt...erter-download
There are currently 1 users browsing this thread. (0 members and 1 guests)