Have fun!!! Take pics....hope you got beer..
Have fun!!! Take pics....hope you got beer..
2007 4.7 Liter XK | Front Modified OME HD Lift | Rear 4" Superlift | JBA UCA's | Rusty's Rear Adjustable Track Bar | Rysty’s Adjustable Upper and Lower Rear Control Arms w/Heim Joints | Mickey Thompson Classic III 17x9 Wheels | 315/70R17 Goodyear Duratracs | Airflow Snorkel | Flowmaster 40 Series Muffler | Superchips Flashpaq | Mopar Skids | 4xGuard Belly Guard | American Rebel Rear Diff Cover | Rear Powertrax No-Slip | Front Electronic Locker | Rear Heat/AC Delete
2008 Jeep Commander 3.7L V6 4x4, Rocky Road 2.25" lift, Bilstein Struts, Monroe Sensa-Trac Load Leveler Shocks, Rusty's Adjustable Track Bar, K&N CAI 63, Flowmaster Super 44 Offroad Muffler, Bull bar w/ driving lights.
Out with the old:
In with the New:
Nice, now all you need is an alignment!
2007 4.7 Liter XK | Front Modified OME HD Lift | Rear 4" Superlift | JBA UCA's | Rusty's Rear Adjustable Track Bar | Rysty’s Adjustable Upper and Lower Rear Control Arms w/Heim Joints | Mickey Thompson Classic III 17x9 Wheels | 315/70R17 Goodyear Duratracs | Airflow Snorkel | Flowmaster 40 Series Muffler | Superchips Flashpaq | Mopar Skids | 4xGuard Belly Guard | American Rebel Rear Diff Cover | Rear Powertrax No-Slip | Front Electronic Locker | Rear Heat/AC Delete
Yup! I got it pretty close using a string and angle finder... will put it on the Hunter machine Wednesday.
Also found out my brand new moog sway bar bushings are bad! Ordered some oem bushings to swap in. Hopefully my front end is quiet after all this.
hmmm what do you mean bad? When did you install them.
2007 4.7 Liter XK | Front Modified OME HD Lift | Rear 4" Superlift | JBA UCA's | Rusty's Rear Adjustable Track Bar | Rysty’s Adjustable Upper and Lower Rear Control Arms w/Heim Joints | Mickey Thompson Classic III 17x9 Wheels | 315/70R17 Goodyear Duratracs | Airflow Snorkel | Flowmaster 40 Series Muffler | Superchips Flashpaq | Mopar Skids | 4xGuard Belly Guard | American Rebel Rear Diff Cover | Rear Powertrax No-Slip | Front Electronic Locker | Rear Heat/AC Delete
Installed them last summer.
Bad as in I can take the sway bar and jiggle it up and down.... as if the bushings compressed so theres now clearance.
Is see. That's not good
2007 4.7 Liter XK | Front Modified OME HD Lift | Rear 4" Superlift | JBA UCA's | Rusty's Rear Adjustable Track Bar | Rysty’s Adjustable Upper and Lower Rear Control Arms w/Heim Joints | Mickey Thompson Classic III 17x9 Wheels | 315/70R17 Goodyear Duratracs | Airflow Snorkel | Flowmaster 40 Series Muffler | Superchips Flashpaq | Mopar Skids | 4xGuard Belly Guard | American Rebel Rear Diff Cover | Rear Powertrax No-Slip | Front Electronic Locker | Rear Heat/AC Delete
Used JB weld to fix the hole I stared in it while it was parked outside my den window.
HT
Whats going on to replace your bushimgs so often. Im running on the same ones simce I bought it in 2009. Also the same ones since i lifted it in 2010.
There are currently 5 users browsing this thread. (0 members and 5 guests)