THe edit funtion is failing at this time so will retype my last reply.
I will have to look again at what size of the rear spring spacer that Rough Country uses for their 2 BB lift. I am thinking you might be right with it being 1.75.
THe edit funtion is failing at this time so will retype my last reply.
I will have to look again at what size of the rear spring spacer that Rough Country uses for their 2 BB lift. I am thinking you might be right with it being 1.75.
PJMJR508
(Happy Jeep)
Does the rear sit way higher than the front??
2007 4.7 Liter XK | Front Modified OME HD Lift | Rear 4" Superlift | JBA UCA's | Rusty's Rear Adjustable Track Bar | Rysty’s Adjustable Upper and Lower Rear Control Arms w/Heim Joints | Mickey Thompson Classic III 17x9 Wheels | 315/70R17 Goodyear Duratracs | Airflow Snorkel | Flowmaster 40 Series Muffler | Superchips Flashpaq | Mopar Skids | 4xGuard Belly Guard | American Rebel Rear Diff Cover | Rear Powertrax No-Slip | Front Electronic Locker | Rear Heat/AC Delete
it does have a rake right now, because I have not gone back & removed the RC spacer from the rear springs. I also have one of Matt's rear spring spacers in there as well. So it is OME HD Spring with the RC spring spacer & Matt's 1/2 spacer.
Also I only have 1 of Rusty's 1/4 " strut spacer on.
The reason I still have it the way it is right now, is because I will not have a chance to get the jeep in garage again to do the work on it until this weekend.
I do like the lift I got out of it, and I do feel there might be enough threads to put another spacer up front just not sure yet.
I haven't posted after measurements yet because it is dark when I get out of work, and having 2 kids under 4 does not allow me a lot of time in the morning to check.
I will try to get them & post them this weekend.
PJMJR508
(Happy Jeep)
I put the rocky road 3/8" spacers on this weekend with the OME HD and there is still some thread left above the nut.... somewhere between an 1/8" and 1/4" I would think without going to measure.
Thanks.
PJMJR508
(Happy Jeep)
2008 3.7L QT-1 dark blue Jeep Commander // 3+" modified OME lift with 3/8" Rocky Road strut spacer // 4" rear SL springs // 265/70/17 Goodyear Duratracs (Load E) // 1.5" spidertraxx spacers // F-150 Monroe Load Levelers // 4xguard matrix, front guard, belly guard, and rock sliders // 130 watt KC Daylighters - 2 // Airflow snorkel // Thrush welded exhaust // Defender Roof Rack with side ladder // Hypertech Max Energy Programmer
I just measured mine for the hell of it, im just over 37" and am running a slightly taller tire than you guys.
Curious... for you guys measuring close to 38", whats your center-of-hub to fender measurement at ride height and then at full suspension droop (jack up from the crossmember).
I'm trying to remember when I measured this, but pretty sure I was under 2" of suspension droop with my current setup. If you guys are almost an inch taller....
I will be able to get all the measurements this weekend.
PJMJR508
(Happy Jeep)
There are currently 1 users browsing this thread. (0 members and 1 guests)