Started tearing apart the front end tonight. Here's all the goodies going on.



Work came to a halt when I got to the damn lower strut mounting bolt. The same one I couldn't get off when I put on my lift. It''s been soaking in PB Blaster for almost a week and it still wouldn't come out out. The rubber bushing inside is almost shot and rotates as the bolt turns.



I realized after an hour that I was using the wrong tool. So, for all of you out there that hav had trouble removing that bolt, here is the correct tool for removing it.



Had to stop for the night with the strut, knuckle and lower control arm removed from the drivers side. Won't get a chance until Saturday to get back on it.