After seeing the prices posted above for the heater lines I'm just going to splice them together in the engine bay with a barbed fitting. Will post up my results tonight.
After seeing the prices posted above for the heater lines I'm just going to splice them together in the engine bay with a barbed fitting. Will post up my results tonight.
2006 XK 4.7L QTII
The size for the heater lines is 3/4" for future reference.
I only bought a 1/2" barbed fitting so I had to improvise...I'll let the pictures do the talking. Total cost $0.00.
I still have to crimp the cut lines and do some pinch weld trimming but I'm almost there.
2006 XK 4.7L QTII
Thanks for the photos..
I'm liken the costs listed 0 > $4. !
Just make sure you don't have any kinks like I do in that last pic, I added some more hose clamps in the kinked areas to open them back up. I might revise this in the future but it should do for now.
2006 XK 4.7L QTII
If / when I consider this mod, I might also check at the local junk yard ( sorry... I mean salvage yard, auto recycling center or automotive regeneration facilitating pre-owned parts purveyor ) for the A/C hoses.
Last edited by 1USMC; 05-30-2013 at 07:38 PM.
There are currently 1 users browsing this thread. (0 members and 1 guests)