Sooooo... I've decided, that I like THIS kind of mount for my CB antenna (although I'm going to mount mine higher up than this)
Originally Posted by NeilSmith
I got a 4' Firestick and a Firestick door jamb mount. The mount comes with (2) 45 degree bends in it. I straightened it out so it would have a longer reach into the jamb. It comes with self-tapping screws but I wanted it to be tighter and easily removable in case I need to change a bulb, screws would loosen up too much. I used some nutserts and bolted it in tight. The coax runs out thru the lower inner quarter and up behind the bumper, behind tailight, and behind the black trim above the light. This secures the little extra slack and keep the cable nice and snug.
And I'm gonna go THIS route with my scanner antenna;
I've been itching to get my CB antenna mount off the roof and down by the fender. Well, this is what I've come up with:
I ran out of time to move the stud and run the cable, but you get the idea.
Since my coax running out the back is easy enough, that leaves figuring out HOW to get the scanner cable through THIS!
Reply With Quote