Originally Posted by The_War_Wagon
Had a THOUGHT to rig my cb/scanner setup, by hanging it from the four inner trim nuts (using STRONGER, longer, hex nuts, for starters) inside the central a/c ports on the dash... but have decided it would still be too heavy AND ugly... so I'm BACK to the drawing board, on a "console-ABOVE-the-console" idea, using sheet steel folded & bolted through the lower console trim, and extend it about 2 - 2 1/2' ABOVE the shifter... or some such...
I know you've seen this post before, but maybe you'd like to revisit the idea of my mounting system/location. It's worked out to be really stable. You could probably still stack your goodies and have them easily accessible.
http://www.theultimatejeep.com/showt...th-CB-location
Reply With Quote