Nice setup.
Nice setup.
PJMJR508
(Happy Jeep)
Looks Great !!!
2010 Limited > 5.7 > Pearl Black > QDII > 4" Superlift w-SSR > Bilstein HD Struts + 1/4" spacer > RCV cv Axles > JBA 6" Springs + Matt's 1/2" Spacer > BDS adj LCA > 285-65-18 Nitto Trail Grappler MT's > Moto Metal 951 > K&N CAI > Flowmaster 50 > 4xGuard-Front/Belly skids + Grill Hoop w/ Front Receiver + Rear Diff. Guard > PIIA 520 ATP > Front Camera > Steel Armadillo's Rear Bumper/Tire/ Blitz Carrier/Super Sliders +Secure Console > Dual Batteries > OBA > JKS Rear-JBA Front Discos > FlashPaq
Did a lot of work on Marks xk today.... front diff fluid, oil change, rear lca zerk fittings etc etc. Then the sun came out and I decided to give my xk some luv'in; installed the rivnuts on the passenger side so I could throw the sliders on next weekend.
Had a THOUGHT to rig my cb/scanner setup, by hanging it from the four inner trim nuts (using STRONGER, longer, hex nuts, for starters) inside the central a/c ports on the dash... but have decided it would still be too heavy AND ugly... so I'm BACK to the drawing board, on a "console-ABOVE-the-console" idea, using sheet steel folded & bolted through the lower console trim, and extend it about 2 - 2 1/2' ABOVE the shifter... or some such...
'07 Jeep Commander, Rocky Mountain Edition - 287 V-8 - Superchipped - aFe Stage II R-5A CAI - Flowmaster Super 44 - 2" Daystar lift - Spidertrax spacers - 32x10.5x17 Cooper A/T's - Fastman throttlebody - Skyjacker 8000 shocks
2007 Commander Overland / 4" SuperLift / 285/70R17 Cooper Discoverer ST Maxx / Rusty's adjustable rear UCAs / Carolina Driveline front drive shaft / Flashpaq / DRLs & Tilting Mirrors / Autolite Iridiums / Cobra 29LX Chrome LE CB & Firestik antenna / Rear fog lights / Mopar Grille Guard with HID driving lights
"4 wheel drive does not mean 4 wheel stop!" -Lee Goldberg, WABC TV weatherman
I know you've seen this post before, but maybe you'd like to revisit the idea of my mounting system/location. It's worked out to be really stable. You could probably still stack your goodies and have them easily accessible.
http://www.theultimatejeep.com/showt...th-CB-location
2007 Commander Overland / 4" SuperLift / 285/70R17 Cooper Discoverer ST Maxx / Rusty's adjustable rear UCAs / Carolina Driveline front drive shaft / Flashpaq / DRLs & Tilting Mirrors / Autolite Iridiums / Cobra 29LX Chrome LE CB & Firestik antenna / Rear fog lights / Mopar Grille Guard with HID driving lights
"4 wheel drive does not mean 4 wheel stop!" -Lee Goldberg, WABC TV weatherman
I had seen that, and it's a nice setup. I worry about Pittsburgh drivers (being hit BY one of them), and have that thing get airborne - especially since I travel with one or more children in the truck quite often. I have a doublestack mounting bracket, that I intended to use in the Ramcharger. I may utilize it in my current idea, and buy ANOTHER one for the RC.
I'm kid-free today (mommy got Labor Day weekend off - NOT daddy...), so I can go back over to Lowes & STARE at the sheet metal for a while. Guy at my church works in industrial HVAC, so he's got a bending jig IN the company truck - we can go to town on some sheet steel!
'07 Jeep Commander, Rocky Mountain Edition - 287 V-8 - Superchipped - aFe Stage II R-5A CAI - Flowmaster Super 44 - 2" Daystar lift - Spidertrax spacers - 32x10.5x17 Cooper A/T's - Fastman throttlebody - Skyjacker 8000 shocks
Installed my rustys rear adjustable trac bar and painted my diff cover! Also helped a busy install new lower control arms on his superlift wk.
06 4.7 | Modded 6" Lift | JBA 6" Coils | Rustys Rear UCA's | Fox Shocks | JBA UCA's | Gibson Catback w/ FM S44 Muffler | K&N CAI | Hypertech | 4.56 Gears | Powertrax Locker | Autolite Iridiums | Mobil 1 (engine&diff) | 34" BFG AT's | 20x9 Ultra Gauntlet | EBC Dimpled&Slotted Rotors | Hawk Ceramic Pads | Blue Interior LED's | Husky Floor Liners | VVME 8000k HID | Pioneer AVH-P8400BH | Tinted LED Tail Lights
Ended up getting the defender rack installed a few days ago. Thanks again to both pjmjr and superacerc for the roof rack.
After searching the web for awhile for a side mounted ladder, all I could find were either for Land rovers or some 200$ "specialty offroad" ladder; So I decided to break out the propane torch and make my own. Here are some pics, sorry for the crummy quality:
2008 3.7L QT-1 dark blue Jeep Commander // 3+" modified OME lift with 3/8" Rocky Road strut spacer // 4" rear SL springs // 265/70/17 Goodyear Duratracs (Load E) // 1.5" spidertraxx spacers // F-150 Monroe Load Levelers // 4xguard matrix, front guard, belly guard, and rock sliders // 130 watt KC Daylighters - 2 // Airflow snorkel // Thrush welded exhaust // Defender Roof Rack with side ladder // Hypertech Max Energy Programmer
There are currently 2 users browsing this thread. (0 members and 2 guests)