Who needs a plasma cutter when you have a good cutoff wheel and a sawzall?????
Who needs a plasma cutter when you have a good cutoff wheel and a sawzall?????
2010 5.7 QTII - OME HD w/ 3/8" spacers up front and F150 MLL in rear, JBA UCA 6.7, JKS 2034 Front Quick Disconnects, Gas Tank Skid Mod, PinchWeld Mod, 1.5" SpiderTrax, General Grabber AT 265/70/17, Custom Front Receiver / Plow Mount, Custom Tow Rings F/R, Diablo Intune.
I hate to see what you have to charge for the brackets after factoring this into the cost:
http://newjersey.craigslist.org/tls/4183046365.html
2010 5.7 QTII - OME HD w/ 3/8" spacers up front and F150 MLL in rear, JBA UCA 6.7, JKS 2034 Front Quick Disconnects, Gas Tank Skid Mod, PinchWeld Mod, 1.5" SpiderTrax, General Grabber AT 265/70/17, Custom Front Receiver / Plow Mount, Custom Tow Rings F/R, Diablo Intune.
Holy crap thats an expensive plasma cutter!!!
Im not planning on manufacturing them to sell. If they work well ill probably make myself another set and send the working prototypes to Jon to see if he wants to produce/sell them.
Snap-on doesn't make them any other way.
2010 5.7 QTII - OME HD w/ 3/8" spacers up front and F150 MLL in rear, JBA UCA 6.7, JKS 2034 Front Quick Disconnects, Gas Tank Skid Mod, PinchWeld Mod, 1.5" SpiderTrax, General Grabber AT 265/70/17, Custom Front Receiver / Plow Mount, Custom Tow Rings F/R, Diablo Intune.
2007 4.7 Liter XK | Front Modified OME HD Lift | Rear 4" Superlift | JBA UCA's | Rusty's Rear Adjustable Track Bar | Rysty’s Adjustable Upper and Lower Rear Control Arms w/Heim Joints | Mickey Thompson Classic III 17x9 Wheels | 315/70R17 Goodyear Duratracs | Airflow Snorkel | Flowmaster 40 Series Muffler | Superchips Flashpaq | Mopar Skids | 4xGuard Belly Guard | American Rebel Rear Diff Cover | Rear Powertrax No-Slip | Front Electronic Locker | Rear Heat/AC Delete
lmao... you two can fight over the prototype set after Jon's done taking measurements
BUT this might be delayed a bit. I had a little chunk of change set aside to help fund my rear bumper and i had somewhat given up hope that I was ever going to get one. So the plan was to use that money to finally get a decent welder and put the rest of it plus some tax return money towards the superlift this spring.
Well as of yesterday it looks like Jon's serious about making bumpers again. If he can promise it's here before Christmas I may have to pull the trigger on that as priority #1 and that'll become my "winter vacation fun project" instead of these brackets.
I'll keep my eye out for a decent (but cheap $$) used welder... otherwise i'll use some of my tax return this spring to get the welder and start this project back up (and push the SL into next fall/winter)
Hmmmm not cool lol
2007 4.7 Liter XK | Front Modified OME HD Lift | Rear 4" Superlift | JBA UCA's | Rusty's Rear Adjustable Track Bar | Rysty’s Adjustable Upper and Lower Rear Control Arms w/Heim Joints | Mickey Thompson Classic III 17x9 Wheels | 315/70R17 Goodyear Duratracs | Airflow Snorkel | Flowmaster 40 Series Muffler | Superchips Flashpaq | Mopar Skids | 4xGuard Belly Guard | American Rebel Rear Diff Cover | Rear Powertrax No-Slip | Front Electronic Locker | Rear Heat/AC Delete
Hey it may still happen... lol i'm happy i didn't order the welder last weak. If I find a nice used one before my time off at work during the holidays i'll be really busy in the "shop"
Does this mean your not selling your lift!
Sent from my SCH-I535 using Tapatalk 2
There are currently 1 users browsing this thread. (0 members and 1 guests)