I hate to say it Matt but maybe you should have not cut the spings and went from there. I could be totally misunderstanding all this though. Hope it all works out for you!
I hate to say it Matt but maybe you should have not cut the spings and went from there. I could be totally misunderstanding all this though. Hope it all works out for you!
Last edited by 07JeepXK; 12-20-2013 at 06:08 AM.
2007 4.7 Liter XK | Front Modified OME HD Lift | Rear 4" Superlift | JBA UCA's | Rusty's Rear Adjustable Track Bar | Rysty’s Adjustable Upper and Lower Rear Control Arms w/Heim Joints | Mickey Thompson Classic III 17x9 Wheels | 315/70R17 Goodyear Duratracs | Airflow Snorkel | Flowmaster 40 Series Muffler | Superchips Flashpaq | Mopar Skids | 4xGuard Belly Guard | American Rebel Rear Diff Cover | Rear Powertrax No-Slip | Front Electronic Locker | Rear Heat/AC Delete
What gets me is that i found pictures of XK's running the OME MD and the front was lifted ~2". I didn't want to add 2 more inches on that.
Hopefully the little bit I cut off will work out. If i'm 1/2" lower than i want to be i can always throw some strut spacers in.
Well let me know cause I need front struts bad and want more lift at the same time
2007 4.7 Liter XK | Front Modified OME HD Lift | Rear 4" Superlift | JBA UCA's | Rusty's Rear Adjustable Track Bar | Rysty’s Adjustable Upper and Lower Rear Control Arms w/Heim Joints | Mickey Thompson Classic III 17x9 Wheels | 315/70R17 Goodyear Duratracs | Airflow Snorkel | Flowmaster 40 Series Muffler | Superchips Flashpaq | Mopar Skids | 4xGuard Belly Guard | American Rebel Rear Diff Cover | Rear Powertrax No-Slip | Front Electronic Locker | Rear Heat/AC Delete
I hope my 5100's show up today
2006 XK 4.7L QTII
2006 XK 4.7L QTII
To add a positive spin to this thread, the additional weight of my rear bumper and leverage from the tire lowered my rear about 1/2". That adds some slack with where my front can end up to still be in my "happy" range. 1/2" higher than it is now would be nice, but a 1/2" lower isn't the end of the world either.
It looks like my guestimation of .25-.8" taller is pretty much spot on. Passenger side is still apart due to other issues, but I've gained about 1" as of now. I expect it to settle some so figure somewhere about 1/2" taller than my OME HD + strut spacer setup.
Looking forward to getting the other side done so I can test drive.
How was the install besides the problem with lca? What's the angle of cv looking like with extra 1"
Sent from my SGH-T999 using Tapatalk
2K6 Limited Jeep Green Metallic/Saddle Brown Leather XK HEMI QDII Old Man Emu HD Suspension w/ Fox Emulsion 2.0 Rear Shocks 1.5" SpiderTraxx Wheel Spacers 265/70 GoodYear MTRs w/Kevlar True Dual Exhuast w/IMCO 50 K&N 63 CAI Diablo 91/Performance Transmission Tuned SA Belly Skid MOPAR Gas Tank Skid, Transfer Case Skid, Suspension Skid Front Tow Hooks 6k HID Lows/3k Fogs
I'll get pics once its all back together. The extra inch is too much but once it settles I think it'll be workable.
There are currently 1 users browsing this thread. (0 members and 1 guests)