Adam those are directly out of the 2008 manual. Like I said it may be specific to model year. For 2008 the 3.7/4.7 part number is a dual hose assembly.
Adam those are directly out of the 2008 manual. Like I said it may be specific to model year. For 2008 the 3.7/4.7 part number is a dual hose assembly.
Oh so I guess it helps to know what year and engine he has!
Edit: first post of this thread says 06 Hemi so my part numbers will be different than his
Last edited by 07JeepXK; 05-01-2014 at 01:45 PM.
2007 4.7 Liter XK | Front Modified OME HD Lift | Rear 4" Superlift | JBA UCA's | Rusty's Rear Adjustable Track Bar | Rysty’s Adjustable Upper and Lower Rear Control Arms w/Heim Joints | Mickey Thompson Classic III 17x9 Wheels | 315/70R17 Goodyear Duratracs | Airflow Snorkel | Flowmaster 40 Series Muffler | Superchips Flashpaq | Mopar Skids | 4xGuard Belly Guard | American Rebel Rear Diff Cover | Rear Powertrax No-Slip | Front Electronic Locker | Rear Heat/AC Delete
I think I have a copy of the 2006 parts manual at home.... will have to check that out tonight
Matt, did you have a copy of the parts catalog
I do but ive been busy the past two nights. Remebered that we have the links here though.... you can download your own
http://www.theultimatejeep.com/showt...t=parts+manual
Finaly got my superchips and turned off the tpms Nice to not get the message in the EVIC.
Tried finding the part numbers but looks like I'm not a parts guru .....
Ended up ordering 68000978AA & 68000979AA. Same as Matt had found. Looks like these will fit the 06 5.7 also.
With this heat delete, will the rear AC work as normal ?
A bit late but yeah, those are the part numbers for non-rear heat in the 2006 parts manual so you should be good to go
The rear A/C should still work normal, as will the blower motor for air circulation.
Make sure you post up pics!
Finnaly the hoses are inbound will be doing a lot of work now:
1. Rear heat delete
2. JBA UCA's
3. Brake discs and rotors
4. Front TPMS delete
5. 12 Bolt diff cover
6. Hopefully 285's mounted
07jeepXK, how did you connect the hoses? The hoses is one very short , about 10" and the other is a bit longer. Do you disconnect the two hoses in the engine compartment and connect one of the new ones between the two outlet/inlet and do similar in the back ?
There are currently 1 users browsing this thread. (0 members and 1 guests)