Well I tried while on lunch going just the SC programming with out the AEV completely and every turn I did setoff the TC light on the dash. So I will have to install the AEV & just deal with the warning lights being on until I can get resolved via AEV,
PJMJR508
(Happy Jeep)
I ran my MTRs at 36 psi I think, Id try lowering as well and do a chalk test make sure your patch is still good
2K6 Limited Jeep Green Metallic/Saddle Brown Leather XK HEMI QDII Old Man Emu HD Suspension w/ Fox Emulsion 2.0 Rear Shocks 1.5" SpiderTraxx Wheel Spacers 265/70 GoodYear MTRs w/Kevlar True Dual Exhuast w/IMCO 50 K&N 63 CAI Diablo 91/Performance Transmission Tuned SA Belly Skid MOPAR Gas Tank Skid, Transfer Case Skid, Suspension Skid Front Tow Hooks 6k HID Lows/3k Fogs
Hopefully AEV will have some answers for you and its something simple.
I fixed the AEV issue.
in the instructions it had in bold print do not connect the leads in both the spots on the unit. Found out that it was only ment for that spot in the instructions as in the next section you are to put the connectors on both spots. It was very clear as the shop guy made the same mistake as I did.
Now have to work on the RCV axle issue.
PJMJR508
(Happy Jeep)
There are currently 1 users browsing this thread. (0 members and 1 guests)