I think i will eventually paint the side screws black or put a black finish covering on them.
Its very important not to get these too tight during the process or the main bolts on the bottom wont line up.
ON my passengers side, i had the whole guard mounting a tiny bit too high and the door rubbed at first. but once i put the main bolts on the bottom it brought it down into place.
On one side i tucked the plastic fender well behind it. that pushed the fender flare in a bit and causes a gap. I will mold the plastic with a heat gun and i think this will then be corrected.the other side i let hang for now to test it, but that makes it rub the MT tire when I turn.
but they turned out to be well worth the wait!