Thats what I thought & I like the steel wheel idea as well. I have 3 bent stock rims & need to replace & thinking steel will hold up better to what I do.
Thats what I thought & I like the steel wheel idea as well. I have 3 bent stock rims & need to replace & thinking steel will hold up better to what I do.
PJMJR508
(Happy Jeep)
Thats actually why i went with the AEV savegres, bent more factory rims than i can make into garden hose reels, and the steel wheels we get down here are very heavy compared. I havent even managed to get the Savegres any damage yet. I am running the JK offset too, the +10mm ones.
2007 WH Grand Cherokee CRD QDII - 3" Exhaust, GDE Flash Tune, CRDSTU Hybrid Lift & bash Plates, 4xGuard Rock Rails & Rear Sliders, Saguaro F&R Bars, Warn 9.5CTI-s, AEV Saverge Rims, 35" KM2's, Snorkel, Custom Rear Drawers, ARB Dual Compressor + On Board Air, BullyDog Monitor, Dual Optimas Front and Dual Rear Aux Batteries YouTube Vids
Well the ProComp wheels didn't fit. They hit the calipers, so because of time constraints (I leave for the Rubicon Trail on Wednesday), I ended up getting some MB allow rims which Discount Tire had in stock: 17x8.5" with a -6mm offset. They're not bad-looking. We double checked for clearance at full droop and no problems. I really didn't want alloy rims again but, what the heck, they were cheaper than the steel.
'06 XK Limited, 5.7 Hemi, QDII, OME struts & HD springs, JBA UCAs, 285/70R17 BFG KM2, 4XGuard Sliders, 4XGuard Diff Guard, Fox 2.0 reservoir shocks, custom bumpers and Warn xi9000
Wish list: SFA, in-dash Windows 8 PC
I must have missed this. I could have told you a 17x8 steel wheel with 4.5 inch BS wouldn't clear the caliper. I know this because I'm running them with my 33's and 1/4 spacers up front.
2007 4.7 Liter XK | Front Modified OME HD Lift | Rear 4" Superlift | JBA UCA's | Rusty's Rear Adjustable Track Bar | Rysty’s Adjustable Upper and Lower Rear Control Arms w/Heim Joints | Mickey Thompson Classic III 17x9 Wheels | 315/70R17 Goodyear Duratracs | Airflow Snorkel | Flowmaster 40 Series Muffler | Superchips Flashpaq | Mopar Skids | 4xGuard Belly Guard | American Rebel Rear Diff Cover | Rear Powertrax No-Slip | Front Electronic Locker | Rear Heat/AC Delete
'06 XK Limited, 5.7 Hemi, QDII, OME struts & HD springs, JBA UCAs, 285/70R17 BFG KM2, 4XGuard Sliders, 4XGuard Diff Guard, Fox 2.0 reservoir shocks, custom bumpers and Warn xi9000
Wish list: SFA, in-dash Windows 8 PC
I ran a 1/4" spacer up front for awhile with no issues and that included a couple of wheeling trips. It held but I never did like it and got them off when I had the chance.
Last edited by 07JeepXK; 07-17-2012 at 12:10 PM.
2007 4.7 Liter XK | Front Modified OME HD Lift | Rear 4" Superlift | JBA UCA's | Rusty's Rear Adjustable Track Bar | Rysty’s Adjustable Upper and Lower Rear Control Arms w/Heim Joints | Mickey Thompson Classic III 17x9 Wheels | 315/70R17 Goodyear Duratracs | Airflow Snorkel | Flowmaster 40 Series Muffler | Superchips Flashpaq | Mopar Skids | 4xGuard Belly Guard | American Rebel Rear Diff Cover | Rear Powertrax No-Slip | Front Electronic Locker | Rear Heat/AC Delete
The MB TKO's seem to be working fine. We'll see how well they hold up on the Rubicon Trail.
'06 XK Limited, 5.7 Hemi, QDII, OME struts & HD springs, JBA UCAs, 285/70R17 BFG KM2, 4XGuard Sliders, 4XGuard Diff Guard, Fox 2.0 reservoir shocks, custom bumpers and Warn xi9000
Wish list: SFA, in-dash Windows 8 PC
There are currently 1 users browsing this thread. (0 members and 1 guests)