2006 XK Limited, 5.7L Hemi
Dark Khaki, QDII, Rocky Road 2.25" lift, Steel Armadillo front bumper with Warn PowerPlant winch, Steel Armadillo rear bumper w/ tire carrier, Rock Sliders, Light Bar & Front Fender Tube Fenders, 4xGuard belly skid plate & rear differential guard, BFG M/T A/T 255/75R17s on Rubicon rims, Spidertrax 1.5 inch wheel spacers, Rhino Rack Pioneer Tray with FoxWing Awning, Superchips VIVID Programmer, Air Flow snorkel, Steel Armadillo Secure Console, Cobra CB Radio, Lock Pick Video Programmer, ASFIR Skid Plates.
Knappster's Garage
AKA: the Owner of The Steel Armadillo L.L.C.
Really? Not the 400P, it's the 400P-Automatic. The 400P is $200 but i wanted the automatic function so i didn't have to run to turn it off.
$200 400P = http://www.viaircorp.com/OffRoad/400P.html
$260 400P-Auto = http://www.viaircorp.com/OffRoad/400P-A.html
If you can do the 400P-Auto for under $260 shipped then.....
2006 XK Limited, 5.7L Hemi
Dark Khaki, QDII, Rocky Road 2.25" lift, Steel Armadillo front bumper with Warn PowerPlant winch, Steel Armadillo rear bumper w/ tire carrier, Rock Sliders, Light Bar & Front Fender Tube Fenders, 4xGuard belly skid plate & rear differential guard, BFG M/T A/T 255/75R17s on Rubicon rims, Spidertrax 1.5 inch wheel spacers, Rhino Rack Pioneer Tray with FoxWing Awning, Superchips VIVID Programmer, Air Flow snorkel, Steel Armadillo Secure Console, Cobra CB Radio, Lock Pick Video Programmer, ASFIR Skid Plates.
Knappster's Garage
AKA: the Owner of The Steel Armadillo L.L.C.
Yeah it is one hell of an advantage... but not everything is eligible for the shipping, and it does cost money to be a member of prime.
Here's an E-mail i sent to VIAIR. I'll keep you guys informed. I definitely want to change the gauge on this thing... but for $80+, I'll just buy a new tire inflator for $30.
To whomever gets this E-mail.... Happy New Year!
I got a 400P-Automatic for Christmas this year. I had to test it out right away and it worked great, except I was very disappointed in the 200 psi gauge selection.
The gauge itself is practically useless. To start, it's not accurate at all below 30 psi (I wouldn't expect a 200 psi gauge to be), so users need a separate gauge to air down. And the same for airing up.... although it's good enough to get in the "ballpark" of the pressure I'd want, the resolution just isn't there. I've been in the offroad world for quite some time and I've never heard of someone inflating their tires over 60 psi; the most common range for oversized offroad tires is 30-50 psi. A 0-60 or 0-100 psi gauge would be much more applicable for this kit. I provided a picture with this E-mail to show what I'm talking about for the resolution of the gauges.
I'm not sure if the 200 psi gauge was put there for legal/liability reasons? In any case, the compressor is designed to kick on below 120 psi and turn off at 145 psi. So if the high pressure gauge is required to cover those pressure, I would advise looking at a 0-150 or 0-160 gauge to help a bit with the resolution.
I was hoping that you could help me replace the gauge on my unit with a more applicable 0-60 psi gauge. I looked at McMaster.com's catalog and a 0-60 psi, 4" round, 1/4"NPT, non-certified gauge costs $80 + shipping. Can you help locate (or even supply) a more affordable replacement?
Thanks in advance for your help,
Matt
I just realized that the McMaster guages are all Grade-A accuracy... I'll have to wait for VIAIR to respond since I don't know what class their gauge is.
If it's Grade-B, I can get something like this:
http://valvesandinstruments.com/3-1-...05-02l-60.html
Edit: Just measured and looks like the VIAIR is a 2.5" gauge face, so this one would be more applicable:
http://valvesandinstruments.com/2-1-...05-02l-60.html
Last edited by Matt; 01-01-2012 at 08:08 AM.
That's better then $80
There are currently 1 users browsing this thread. (0 members and 1 guests)