PJMJR508's Garage

[pjmjr508]

Current Hub to Fender
FD 25 1/4" FP 26"

Having the alignment rechecked tomorrow.
Issues I am currently working on.
Once the front passenger side starts to flex the DS hits the gas tank skid
DS Ujoints are whistling and the rubber cover on DS was ripped off when it tagged the gas tank skid. Need to replace the Rear DS, will be looking at Carolina DS or NW driveshafts here in town and going from there.
I went to test everything out on lunch at work yesterday by hitting some mud puddles at the water next to work and now my ABS & BAS/ESP and the TC lights are on. These are the codes it is throwing C1015, B1630, U0415. Will be pulling the front tires on it tomorrow to see if I see anything.
The knocking sounds was the Pas rcv axle & will contact them tomorrow. When the shop swapped it out with the OEM one the intershaft was seized unto the RCV axle. From my understanding it took the mech 45 min with a deadblow to get them apart. The OEM one was put back in & goes in out & out with no issue. The RCV axle came apart when it was being removed as well.

Items still need to do
Swap out the rear diff cover.
Get new front DS
Rear adjustable UCA's & LCA's

Future MODs
Rear bumper
lights

I have had somewhat lifted rigs in the past, this is the biggest I have ever had so still learning. I know there are things that pop up when you MOD a rig, but this is getting annoying. It seems like one thing after the other. Once all is worked out, all should be golden.

[Sal-XK]

Current Hub to Fender
FD 25 1/4" FP 26"

Having the alignment rechecked tomorrow.
Issues I am currently working on.
Once the front passenger side starts to flex the DS hits the gas tank skid
DS Ujoints are whistling and the rubber cover on DS was ripped off when it tagged the gas tank skid. Need to replace the Rear DS, will be looking at Carolina DS or NW driveshafts here in town and going from there.
I went to test everything out on lunch at work yesterday by hitting some mud puddles at the water next to work and now my ABS & BAS/ESP and the TC lights are on. These are the codes it is throwing C1015, B1630, U0415. Will be pulling the front tires on it tomorrow to see if I see anything.
The knocking sounds was the Pas rcv axle & will contact them tomorrow. When the shop swapped it out with the OEM one the intershaft was seized unto the RCV axle. From my understanding it took the mech 45 min with a deadblow to get them apart. The OEM one was put back in & goes in out & out with no issue. The RCV axle came apart when it was being removed as well.

Items still need to do
Swap out the rear diff cover.
Get new front DS
Rear adjustable UCA's & LCA's

Future MODs
Rear bumper
lights

I have had somewhat lifted rigs in the past, this is the biggest I have ever had so still learning. I know there are things that pop up when you MOD a rig, but this is getting annoying. It seems like one thing after the other. Once all is worked out, all should be golden.

Didn't you install a rear adjustable track bar? How bad is the rear pinon angle? You having any issues running the OEM axles? Two of the codes makes sense to me if your axle was binding up real bad. C1015 is wheel speed sensor correct? U0415 has something to do with the ABS correct? If that's the case and that tires was way off on reading because it was binding up it would throw codes. Not sure but that's my best guess right now.

[pjmjr508]

Didn't you install a rear adjustable track bar? How bad is the rear pinon angle? You having any issues running the OEM axles? Two of the codes makes sense to me if your axle was binding up real bad. C1015 is wheel speed sensor correct? U0415 has something to do with the ABS correct? If that's the case and that tires was way off on reading because it was binding up it would throw codes. Not sure but that's my best guess right now.

Yes on the adjustable trackbar, I have bent edges away from the tank skid & once it stops pouring rain I will work on adjusting it away from that skid.
Did not look to bad to me, tomorrow I will take & post a pic of it.
I put the OEM passanger OEM axle back in & it works great.
The codes only came on once I hit the first large mud puddle, mostly water and that was after I put the OEM one back in. Here is what trips me out, my 4lo still works with the Service 4WD System error displayed.

Also once it stops raining I am going to pull the front tires and get a better look at senors up front.
When I had this lift installed, I also had them on the front install new LCA's & Wheel Hubs & 5100 struts so with the lifts provided knuckles the entire front end suspension is new.

I look it like this, I need to get all the kinks & bugs out now so when I hit the trails I will have no issues. I just hope I can get all resolved before mid next month for when I park it for 3 months.

[06JeepXKHEMI]

I would check all connections, make sure nothing is maxed out, stretched, kinked etc.. I think Sal may be on to something as well,, but since lights came on after OEM axles went in is weird.. Im sure its probably something simple, good luck!!! At least that thing looks sick now, straight BEAST!

[pjmjr508]

here are the pics of the ds & rear diff angle.

Took it in & had it aligned and rides a lot better.
Still off a bit

[07JeepXK]

Your pinion angle looks fine in those pictures.

If you do end up getting adjustable rear upper and lower control arms I'll be more than happy to buy your Superlift rear lower control arms from you.