Page 7 of 8 FirstFirst ... 5678 LastLast
Results 61 to 70 of 79

Thread: Rack and pinion needs drop on Superlift

  1. #61
    Lifetime Member Getting Dirty Matt's Avatar
    Join Date
    Feb 2011
    Posts
    7,771
    Rep Power
    22
    Based on AEV confirming the +25mm offset, he's currently running 5.75" backspace.
    Test fitting is a good idea to be sure you'll clear.

  2. #62
    Super Moderator Getting Dirty 07JeepXK's Avatar
    Join Date
    Jun 2010
    Location
    East Aurora, NY
    Posts
    3,082
    Rep Power
    17
    Quote Originally Posted by Matt View Post
    Based on AEV confirming the +25mm offset, he's currently running 5.75" backspace.
    Test fitting is a good idea to be sure you'll clear.
    If thats correct then he should clear fine with 5 inches of BS
    2007 4.7 Liter XK | Front Modified OME HD Lift | Rear 4" Superlift | JBA UCA's | Rusty's Rear Adjustable Track Bar | Rysty’s Adjustable Upper and Lower Rear Control Arms w/Heim Joints | Mickey Thompson Classic III 17x9 Wheels | 315/70R17 Goodyear Duratracs | Airflow Snorkel | Flowmaster 40 Series Muffler | Superchips Flashpaq | Mopar Skids | 4xGuard Belly Guard | American Rebel Rear Diff Cover | Rear Powertrax No-Slip | Front Electronic Locker | Rear Heat/AC Delete

  3. #63
    Lifetime Member Getting Dirty TrialByFire's Avatar
    Join Date
    Mar 2011
    Location
    Albuquerque, NM
    Posts
    356
    Rep Power
    14
    Quote Originally Posted by 07JeepXK View Post
    What is the back spacing of your current wheels? I would try test fitting a wheel with 5" of back spacing before you order new wheels.
    The current backspacing is 5.7". While it was on the lift, I slid the wheel out about 3/4" (almost to the end of the studs) and it cleared easily at full droop.

    I will see if Discount Tire has a wheel we can throw on it before I order a new set though--just to make sure.
    '06 XK Limited, 5.7 Hemi, QDII, OME struts & HD springs, JBA UCAs, 285/70R17 BFG KM2, 4XGuard Sliders, 4XGuard Diff Guard, Fox 2.0 reservoir shocks, custom bumpers and Warn xi9000
    Wish list: SFA, in-dash Windows 8 PC
    http://www.fuelly.com/driver/Blade/commander

  4. #64
    Lifetime Member Getting Dirty TrialByFire's Avatar
    Join Date
    Mar 2011
    Location
    Albuquerque, NM
    Posts
    356
    Rep Power
    14
    Quote Originally Posted by Matt View Post
    So they acknowledged the error and are planning on reimbursing you? You'll have to let us know if they follow through.... if so, that's good to know they're owning up to their mistake.
    They followed through. I got a check for a full reimbursement on 5 rims!
    Even though they blamed it on bad knuckes from Superlift, they stood behind their product.
    '06 XK Limited, 5.7 Hemi, QDII, OME struts & HD springs, JBA UCAs, 285/70R17 BFG KM2, 4XGuard Sliders, 4XGuard Diff Guard, Fox 2.0 reservoir shocks, custom bumpers and Warn xi9000
    Wish list: SFA, in-dash Windows 8 PC
    http://www.fuelly.com/driver/Blade/commander

  5. #65
    Super Moderator Getting Dirty 07JeepXK's Avatar
    Join Date
    Jun 2010
    Location
    East Aurora, NY
    Posts
    3,082
    Rep Power
    17
    So now what are you going to do? Order the AEV Wheels for the JK??
    2007 4.7 Liter XK | Front Modified OME HD Lift | Rear 4" Superlift | JBA UCA's | Rusty's Rear Adjustable Track Bar | Rysty’s Adjustable Upper and Lower Rear Control Arms w/Heim Joints | Mickey Thompson Classic III 17x9 Wheels | 315/70R17 Goodyear Duratracs | Airflow Snorkel | Flowmaster 40 Series Muffler | Superchips Flashpaq | Mopar Skids | 4xGuard Belly Guard | American Rebel Rear Diff Cover | Rear Powertrax No-Slip | Front Electronic Locker | Rear Heat/AC Delete

  6. #66
    Lifetime Member Getting Dirty Matt's Avatar
    Join Date
    Feb 2011
    Posts
    7,771
    Rep Power
    22
    Quote Originally Posted by TrialByFire View Post
    They followed through. I got a check for a full reimbursement on 5 rims!
    Even though they blamed it on bad knuckes from Superlift, they stood behind their product.
    That's awesome!

    They're definitely on the top of my list just due to that costumer service now.

  7. #67
    Lifetime Member Getting Dirty TrialByFire's Avatar
    Join Date
    Mar 2011
    Location
    Albuquerque, NM
    Posts
    356
    Rep Power
    14
    Quote Originally Posted by 07JeepXK View Post
    So now what are you going to do? Order the AEV Wheels for the JK??
    I ordered some Pro Comp 17x8" 0-offset steel rims (4.5" backspace). I'm tired of ripping up nice alloy rims on rocks.

    I do give AEV credit for their customer service. It's very nice to encounter that kind of company.
    '06 XK Limited, 5.7 Hemi, QDII, OME struts & HD springs, JBA UCAs, 285/70R17 BFG KM2, 4XGuard Sliders, 4XGuard Diff Guard, Fox 2.0 reservoir shocks, custom bumpers and Warn xi9000
    Wish list: SFA, in-dash Windows 8 PC
    http://www.fuelly.com/driver/Blade/commander

  8. #68
    Lifetime Member Getting Dirty pjmjr508's Avatar
    Join Date
    Jan 2011
    Location
    Everett WA
    Posts
    1,673
    Rep Power
    15
    Quote Originally Posted by TrialByFire View Post
    I ordered some Pro Comp 17x8" 0-offset steel rims (4.5" backspace). I'm tired of ripping up nice alloy rims on rocks.

    I do give AEV credit for their customer service. It's very nice to encounter that kind of company.
    This setup will allow to run without spacers with your oversize tires right?
    PJMJR508
    (Happy Jeep)

  9. #69
    Lifetime Member Getting Dirty Matt's Avatar
    Join Date
    Feb 2011
    Posts
    7,771
    Rep Power
    22
    ^^yup. That's like having 1.5" spacers on stock wheels.

  10. #70
    Lifetime Member Getting Dirty pjmjr508's Avatar
    Join Date
    Jan 2011
    Location
    Everett WA
    Posts
    1,673
    Rep Power
    15
    Thats what I thought & I like the steel wheel idea as well. I have 3 bent stock rims & need to replace & thinking steel will hold up better to what I do.
    PJMJR508
    (Happy Jeep)

Page 7 of 8 FirstFirst ... 5678 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 72
    Last Post: 11-19-2013, 11:44 AM
  2. F/S New Mopar rear ring and pinion in 3.55
    By cmdr jim in forum Parts For Sale / Wanted / Trade
    Replies: 5
    Last Post: 05-30-2012, 09:46 AM
  3. Who's next for the SuperLift??
    By Matt in forum Suspension & Lifts
    Replies: 59
    Last Post: 09-09-2011, 07:08 PM
  4. Rear diff leaking - pinion seal
    By jcoulter in forum Transmissions / Transfer Cases / Drive Train
    Replies: 12
    Last Post: 07-28-2011, 08:52 AM
  5. Removing Pinion Gear
    By Sal-XK in forum Transmissions / Transfer Cases / Drive Train
    Replies: 0
    Last Post: 03-19-2011, 04:02 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •