Results 1 to 10 of 10

Thread: 3.7 CAI Questions?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member Getting Dirty superacerc's Avatar
    Join Date
    Sep 2010
    Posts
    801
    Rep Power
    14
    I've not heard much on the K&N specifically but my buddy with a 3.7 wrangler did the full cat back exhaust and CAintake and then did the superchips 87 tune and said he could tell quite a difference after the tune but not so much before. He contacted the superchips people when he was debating whether or not to buy it and the rep asked if he had already done exhaust and intake. At that time he hadn't so he informed the guy that he didn't have either. The rep said don't buy the flashpaq (at least not for the power gain) cause it wouldn't help unless he upgraded the breathability of his JK first. He eventually did and then bought the flashpaq and is now quite satisfied. He was a little down on power as he's running 35s with 513 gears and a 6 inch lift. (It's the guy in my hidden falls pics with the white rubicon). Lucky him though cause he was able to change his shift points to help compensate for the gears and wheels. I don't think we can do that with the flashpaqs for the commander.
    2007 Commander 4.7L, QTII, OEM Towing Option, tow hooks, 2"OME + 1/4" rusty's leveling spacer, Bilstein 5150 Rear Shks, Rear sway bar removed, 4xguard front skid, Offroad Unlimited Defender Roof Rack, Hella 500FF lights, 265/70/R17 BFG KM2 M/Ts 1.5" Rough Country Wheel Spacers
    http://www.theultimatejeep.com/showt...acerc-s-Garage

  2. #2
    Lifetime Member Getting Dirty
    Join Date
    Jul 2011
    Location
    U.S.
    Posts
    1,355
    Rep Power
    14
    Quote Originally Posted by superacerc View Post
    I've not heard much on the K&N specifically but my buddy with a 3.7 wrangler did the full cat back exhaust and CAintake and then did the superchips 87 tune and said he could tell quite a difference after the tune but not so much before.
    You must mean the 3.8? With 5.13 gears I don't see how he would have had an issue fetching shift points - especially on that 42RLE (I'm assuming it wasn't manual).. It's almost always on the 3rd of 4th gear.... squeeze just a little on the pedal and it drops to 3rd pretty effortlessly.
    Last edited by AJeepZJ; 10-07-2011 at 08:36 PM.

  3. #3
    Senior Member Getting Dirty superacerc's Avatar
    Join Date
    Sep 2010
    Posts
    801
    Rep Power
    14
    Yep 3.8L. Sorry. It wasn't that it didn't pull the weight alright. It was just that it would hunt too much for the right gear before getting the power. Don't know much more about it except he complained about it and his wife didn't like it the way it drove. She drives it to work now that he's got the tune and shift points polished up a bit. He does have all steel bumpers, steel fenders, the stinger up front with a Warn i think, steel spare tire and 2 jerry can holder and steel rock sliders and skid plates on it so it's riding pretty heavy.

    He needed a pull after getting stuck on this rock.
    Last edited by superacerc; 10-07-2011 at 09:12 PM.
    2007 Commander 4.7L, QTII, OEM Towing Option, tow hooks, 2"OME + 1/4" rusty's leveling spacer, Bilstein 5150 Rear Shks, Rear sway bar removed, 4xguard front skid, Offroad Unlimited Defender Roof Rack, Hella 500FF lights, 265/70/R17 BFG KM2 M/Ts 1.5" Rough Country Wheel Spacers
    http://www.theultimatejeep.com/showt...acerc-s-Garage

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. CB Questions
    By Holaday07 4.7 in forum General Jeep Commander & Grand Cherokee Discussion
    Replies: 13
    Last Post: 07-16-2011, 12:40 AM
  2. RK 3.5" Long arm kit questions
    By XK N00b in forum Suspension & Lifts
    Replies: 20
    Last Post: 04-19-2011, 06:35 PM
  3. Two Crazy questions
    By Sal-XK in forum Suspension & Lifts
    Replies: 12
    Last Post: 02-19-2011, 07:09 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •