• Welcome to TheUltimateJeep.com! We're a friendly group of Jeep enthusiasts who love to talk about Jeeps, answer questions and have fun. We specialize in Jeep Commanders and Grand Cherokees, but welcome all Jeep models. Registration is FREE, fast and simple: join our community today!

Fit 4 9" lights on 4xGuard Matrix!

Matt

Moderator
Joined
Feb 21, 2011
Messages
7,771
Reaction score
31
Only had to drill 2 new holes in the Matrix. I used the existing license plate holes for the center support.

Materials to start:

20110604110911-1.jpg


Cut a piece of L-Bracket the same width as the license plate:

20110604112219-1.jpg


You'll notice in the previous picture that I put the bolts in from the back of the Matrix. Thats so I could use the remaining bolt length for mounting my license plate without actually using the license plate as a load bearing component:

20110604112627-1.jpg


I ended up having to cut two slots in the bracket for where the bolts for the lights will come through. Painted it black with a hammered finish.

201164001-1.jpg


Then I mounted the Thule bar. Leveled everything the best I could. Then drilled two more holes, one through each 4xG upright and put a 1/4-20 bolt through each. This last step made the light bar as sturdy as can be. It's now one "solid" piece with the 4xG.

201164002-1.jpg


201164003-1.jpg
 
Last edited:
Added the lights:

201164007-1.jpg


201164008-1.jpg


20110604125316-1.jpg


20110604125327-1.jpg


And some factory quality wiring (i used weatherproof disconnects for all of the lights and also the loom-to-car connection... so everything can be quick disconnected for service)

201164010-1.jpg


I just need to get some relays (they were sold out!!!) and a 15/16th drill bit for my switches tomorrow and im set :cool:

201164Done6-1.jpg


201164Done3-1.jpg


201164Done4-1.jpg
 
Last edited:
Thanks man. going to finish wiring the switches after i have my coffee this morning. I think im doing some flush mount button switches under the left side cubby hole (where i'll eventually put a CB).
 
Which reminds me.... im probably going to use one of the Matrix light tabs for a CB antenna mount
notfound.png
 
Ok.... all done with the wiring.

I ran the wiring through the firewall using an existing grommet:

201165001-1.jpg


I'm a nut with my wiring harnesses... if it doesn't look factory installed, i didnt do my job right!

201165002-1.jpg


201165003-1.jpg


Ran around the fender to the battery:

201165004-1.jpg


201165005-1.jpg


201165008-1.jpg


201165009-1.jpg
 
Last edited:
My secondary Harness for the quick disconnect:

201165010-1.jpg


201165012-1.jpg


201165011-1.jpg


201165013-1.jpg
 
Last edited:
Some finished shots of the wiring....

201165014-1.jpg


201165015-1.jpg


One thing I mis-judged was how far away the rad hose was... I like having plenty of distance there, but should be good.

201165016-1.jpg


And some more of the light bar itself:

201165017-1.jpg


201165018-1.jpg


201165019-1.jpg


201165020-1.jpg
 
Last edited:
Ok, now for work on the interior...

Where it comes through the dash:

201165006-1.jpg


201165007-1.jpg


Template for my switches:

201165021-1.jpg


201165022-1.jpg


201165025-1.jpg


Bet you cant find my wires.....

201165023-1.jpg


201165024-1.jpg
 
Last edited:
A quick test before cleaning up and aiming them:

201165026-1.jpg


201165027-1.jpg


And done!

201165029-1.jpg


201165028-1.jpg
 
Last edited:
....................maybe this should be moved to a "how to" section lol
 
lol that makes sense... dont know why i didnt post it there from the start! I think i was planning on just posting some pics of everything installed... and went a bit further
 
I feel sorry for the person that flashed there brights at you, what a response they will get LOL
 
lol... night-time tanning.

Their faces will look like that scene from the Cone Heads where the dad takes a picture before the dance and Chris Farleys face was burned from the flash.
 
Why burry stuff like this in the "garage"? In that case we'd have a bunch of garage threads and no mod threads for people to search out. :p

Instead, I posted the mod pics in my garage thread and a link to this thread for details on the install.
 
That mod came out shaweet! Great job on the lights, bro and great write up. I'm like you with the wiring making it look factory. I hate seeing 15 different loose colored wires all over the place. Details is what separates you from the rest of the pack, nice work.
 
Thanks guys!

And yeah... wiring is one of my "things" that I hate seeing done hastily. On the flip side, it sucks doing it and takes forever... but its worth it in the end IMO.

Took some pics with the lights on. I probably should have used my phone or a crappier camera.... used my Cannon in "auto" mode and it dimmed the hell out of the reflection of the aftermarket lights. So it makes the difference between the stock lights look not as drastic, because the stock lights didn't reflect a lot off of the trees. The reflection from the fogs was ridiculous.... (hence, the cannon cut down the light intake to compensate)

STOCK LOW BEAMS

201166002-1.jpg


STOCK HIGH BEAMS

201166003-1.jpg


OUTER HELLA PENCIL FOGS

201166004-1.jpg



OUTER HELLA PENCIL FOGS + INNER HELLA DRIVING LIGHTS


201166005-1.jpg
 
Last edited:
Back
Top