• Welcome to TheUltimateJeep.com! We're a friendly group of Jeep enthusiasts who love to talk about Jeeps, answer questions and have fun. We specialize in Jeep Commanders and Grand Cherokees, but welcome all Jeep models. Registration is FREE, fast and simple: join our community today!

Rock Sliders

XK N00b

Lifetime Member
Joined
Mar 29, 2011
Messages
152
Reaction score
0
Location
Goodyear, AZ
Is anyone running sliders on their XK? I'd like to know what you think about which ones you've got. I'm ready to pull the trigger on putting them on mine, just looking for a recommendation as to whose to go with. The 4xguard brand looks Rugged and very clean on the XK. But the Rocky Road looks lighter and easier to install, and $200 less. your thoughts?
 
I've got the supersliders, but I bought them used. Before stumbling across the used pair from Knappster though I had already decided I was getting them because of the price difference, and that they function as a step for roof access when the doors are closed.

I'm not sure on the install side being easier. I had them welded on because I couldn't see how I was supposed to attach them to the frame. (I didn't have instructions though either but Knappster also had them welded)

Downside to them is that they don't give you as much ground clearance as the 4xGuard sliders.
 
IMO, the savings of $200 for the RR sliders is quickly dimished when you consider:

1) the 4xG increase ground clearance at the rockers by about an inch whereas you lose over an inch of ground clearance with the RR.
2) the 4xG fit & finish looks as good as, or better than, stock.
3) the increased sliding surface (8" wide?) will ensure that you glide over things smoothly and provides plenty of support whereas the RR look like basic square tube welded to some brackets

Ease of install is probably a wash between the two. So you may spend an hour longer on one or the other... not really decision maker to me. i'd rather spend a full day installing a quality product than 2 hours installing a lesser product.
 
Looks like I have some Pros & cons to weigh... So far I think I like the 4XGuard better than the others I've seen. Maybe I'll pay Doc a visit and see what he can come up with as an option.
 
FWIW, I think the perfect combination would be an added step extrusion on the 4xG sliders. They couldn't angle upwards because of door interference... but even if they came straight outwards to use as a step as well as added trail protection (from sliding sideways into a tree). It'd also help protect the side of the vehicle from rock chips with wider wheels/tires.
 
Supersliders offer more lateral protection than 4x though.
The ground clearance part didn't seem like such a big deal to me since it's still not the lowest part of the Jeep. Not to say that having them higher isn't a benefit when you aren't level while offroading, it just didn't seem like as big of a deal to me..
 
I was typing that last reply right as Matt was, so there is a little crossing of paths on it..

I agree though, 4x with a welded on step would have been a absolute purchase for me.
 
That sideways sliding protection is a big deal my B pillar has a dent in from such an occasion. :)
 
Last edited:
I just went through and read all the posts under the 4xGuard vendor thread and am pretty much sold on them :)
 
When you are looking at sliders or rails, you have to figure out what you are protecting and how it will work.
My rails did not provide a decent step nor did they protect the bottom at the pinch weld. if i got too close to a rock at 8" on
either side, it did well. But I lost clearance and didnt protect the bottom edge.

My advice to any noobs, find out what it does and how it is supposed to work before you add something to your
vehicle. I blew $300 on cust made crap. The welder did what I asked for, I just didnt know what I needed.
 
Looks like I have some Pros & cons to weigh... So far I think I like the 4XGuard better than the others I've seen. Maybe I'll pay Doc a visit and see what he can come up with as an option.

I sold my RR SuperSliders and Doc is making me new ones as we speak. I am in Oregon so I have not seen them yet but he might post some pics as he develops them.
 
Just got a quote from HellBent Offroad here in St. Louis. They quoted me $300.00 for a custom set. They will mount like the Supersliders, but the slider would 2x3 inch square tube. Beats me if this is good or not, or if I should just suck it up and buy the 4x Guard and spend the extra cash.
 
From what I hear the 4xguard side guards are extremely well made. They are a little steep in price but i know there products are built to take a beating. Someday ill have the side guards, but who knows when that will be. I need to repair the damage first from not having armor there before I slap those bad boys on.
 
I have the side guards and think that they were very much worth every penny. they fit perfectly, as if they were factory parts and they are solid.....very heavy duty. I waited a long time to get them cause of all the production delays, but it was worth the wait. they are spot on for what i wanted. I use them as a step, they give you lift jack points, they give you added clearance and they at fit like a glove....and the install was fairly easy.

IMG_6181JPG-1.jpg


IMG_5983JPG-1.jpg


IMG_6023JPG-1.jpg


IMG_5988JPG-1.jpg
 
Last edited:
Looks like I'll just wait then, you should be in their sales dept.

well, i sold them....or the idea of them....to my wife!...which means i didnt get grief when i bought them. My wife bit on the idea of them as a step for the little one to get use to crawl up in the vehicle.
 
well, i sold them....or the idea of them....to my wife!...which means i didnt get grief when i bought them. My wife bit on the idea of them as a step for the little one to get use to crawl up in the vehicle.

Good angle, I had started the "you know now much it will cost to fix if we hit something" but the step should add extra value to it.

Thanks
 
Good angle, I had started the "you know now much it will cost to fix if we hit something" but the step should add extra value to it.

Thanks

ACTUALLY.... i love it as a step! I find my self using it more than i thought i would....not to climb in, but for reaching the roof, etc.
 
to be fair i should list a "CON" so you know im not connected with the company....hehe...


the only CON is that if you hit heavy mud, and it lands on top them, you need to get off before it dries (or freezes if its cold out) or the doors will drag. but this is usualy not an issue as long as you open and shut the doors before the mud dries.
 

Trending content

Members online

No members online now.

Forum statistics

Threads
3,149
Messages
50,703
Members
907
Latest member
Aruz823
Back
Top