2007Jeep Green Limited
4.7 Flex Fuel, Rocky Road 2.5" Lift on front, 4 inch Superlift coils on rear, Spidertrax 1.5" Spacers, Bridgestone 265/70/17
Chrome Nerf Side Bars, K&N CAI, Flowmaster muffler, Aluminum Diamond Plate Locking Trunk installed
Factory Roof Pod, Blue Ox Baseplate w/D-rings, "Get Lost 4X4" Front Bumper, T-Max 9000 winch, "Get Lost rear tire carrier, 30 gal second gas tank.
Did anyone else read the fine print in the brochure and get a $500 rebate for being a Veteran?
'06 XK Limited, 5.7 Hemi, QDII, OME struts & HD springs, JBA UCAs, 285/70R17 BFG KM2, 4XGuard Sliders, 4XGuard Diff Guard, Fox 2.0 reservoir shocks, custom bumpers and Warn xi9000
Wish list: SFA, in-dash Windows 8 PC
I'm working out a deal with a car hauler now for next year, yep, this is the guy that brought mine back from Rapid City...... He is located in Baltimore, we have been figuring him picking mine up fully loaded and hauling it to either Phoenix or Seattle, we would fly to either city do our adventures for 2 weeks hitting all the west coast states, on a one way route and he would meet us at the end for the XK's return trip home. Looking into doing it with a train as well. (just re-read this,OK sounded weird I'm not doin a train!) Planning for mid July departure, he could drop mine in Phoenix, take the others wherever you want, load yours up when your done and meet me in Seattle.
The "WEST" really is the "BEST". Unless you live for MUD, right???
TrialByFire thanks for sharing this and your pics..I don't get to do things like this but it's fun looking as others like you do.
I could never live west and be employed, I'd be pulling a nooner every day.
good news and bad news..... the bad news is it looks like its much easier to find RS9000XL shocks that'll work with 2-3" budget boost style lifts. I'm sure there are a few in the spec catalogue that will work, but its determining which mounting options are compatible and going from there to find the proper length.
The good new? check out Rancho part number RS19287. Its their nitrogen charged pro-series reservoir shock and it looks like its PERFECTLY suited for the 4" superlift. LS38 for both upper and lower mounts (same as the Monroe shocks Sal just put on), compressed length of 18.5" (about 3.5" longer than stock) and extended length of 30.5" (about 6" longer than stock).
I haven't looked at the RS5000s.... not sure what direction you're looking to go. but with the wheeling you're doing I'd imagine you're looking at more performance based shocks...
2007 Jeep Commander: QTII, Leather, Sunroof, remote start, OEM Skid Plates, 2 in Daystar lift, 255.75.17 BFG Mud Terrains on Moabs, 1.25 " Spidertrax wheel spacers, 4x Guard front guard and Side Guards, Optima Red Top, Robbys half inch leveling spacer, Bilstein 5150 Rear Shocks, Pinch weld mod and trimming!
Last edited by TrialByFire; 10-06-2011 at 09:56 PM.
'06 XK Limited, 5.7 Hemi, QDII, OME struts & HD springs, JBA UCAs, 285/70R17 BFG KM2, 4XGuard Sliders, 4XGuard Diff Guard, Fox 2.0 reservoir shocks, custom bumpers and Warn xi9000
Wish list: SFA, in-dash Windows 8 PC
it looks like RS999050 would work and be a bit easier on the wallet. They're 4.7" longer fully extended and 3" longer fully compressed (thereby not decreasing capabilities ).
The lower mount is an LS26 instead of the stock LS38. This means they have the same sleeve width (1.5") but the LS26 has a 12mm ID instead of the 1/2" ID that the LS38 has. So.... the bolt may be a bit tight in there. But you could always drill it out with a 1/2" bit if needed.
The upper mount is a universal L1 instead of the stock LS30. The L1 means it just has a bushing, no sleeve. Rancho has "parts packs" that contains sleeves, you would just need to call them and ask them which parts pack would adapt an L1 universal to either an LS30, LS38, LS39 or LS40. Any of those would work.... they probably don't have a kit for the LS30 since that's a metric 12mm ID. The LS38-LS40 are 1/2" ID sleeves with increasing widths, 1-1/2, 1-5/8 and 1-11/16 respectively. So depending on which one of those you get, you'll just need a few washers to make up for the excess width since the stock LS30 mount is 1-7/8" wide.
Last edited by Matt; 10-07-2011 at 05:36 AM.
A little late, but I just had to chime in with thanks for warming my heart with the pic. Poughkeepsie is my favorite trail in the land. I know those rocks you're smashed on FAR too well.
Mike
_________________________
2006 5.7L Limited, Inferno Red, QDII, and all goodies. Modified Superlift 4" lift-kit, B.F.G. 285/70R17 A/Ts (1.25" spacers), Aries tail-light guards, AVS ventvisors, KC Hilites off-road lights, and from 4xGuard: Belly Guard, Front Guard 4, Matrix brush guard with Receiver and Grill Hoop, Rear Diff Guard, Rear Guard 2, Rear Sliders, and Side Guards.
I just ordered the RS19287s.
'06 XK Limited, 5.7 Hemi, QDII, OME struts & HD springs, JBA UCAs, 285/70R17 BFG KM2, 4XGuard Sliders, 4XGuard Diff Guard, Fox 2.0 reservoir shocks, custom bumpers and Warn xi9000
Wish list: SFA, in-dash Windows 8 PC
There are currently 1 users browsing this thread. (0 members and 1 guests)