There's no possible way my OME coils would fall out with my 27.5" long shocks and sway bar disconnected. I've had it fully flexed out many times. I'll show you on Sunday(And its not an issue for Sal with stock coils on the RC lift)
Have you measured the actual length of the OME rear shocks? Wonder if their posted specs are wrong and they're actually ~27+ as well
Edit: As a matter of fact, when I just did my extended bump stops last week, I could not have gotten the springs back in without the shocks disconnected and still struggling a bit (more so on the driver side). I have my gas tank skid trimmed to the point where the lower radius arm will hit the actual tank, so that side will drop as far as physically possible without the shock attached.
Reply With Quote