Putting the mounts on:
Putting the mounts on:
Last edited by Matt; 08-19-2011 at 04:36 AM.
And the rack!!!
Last edited by Matt; 08-19-2011 at 04:42 AM.
They might not be cheap man but that's the best mount I've seen for the XK.
Thanks
I'm still a bit angry with how i screwed up the finish of those mounts. I didnt get the surfaces completely flat/smooth for the re-paint, as you can see in a few pics. So when i make the last two mounts im going to put them on and take two off, then do a good job resurfacing and painting them, then continue the cycle until they're ALL painted correctly. Then i'll have 6 mounts and be good to go
Oh yeah.... once I get all the mounts on I plan on using some blue locktite to help keep those tri-groove nuts in place and then spraying the nuts/washers with a quick coat of the black paint so they blend in a bit better
That looks great. Does everything fit in the Garage still? Awesome Job!
2007 Jeep Commander: QTII, Leather, Sunroof, remote start, OEM Skid Plates, 2 in Daystar lift, 255.75.17 BFG Mud Terrains on Moabs, 1.25 " Spidertrax wheel spacers, 4x Guard front guard and Side Guards, Optima Red Top, Robbys half inch leveling spacer, Bilstein 5150 Rear Shocks, Pinch weld mod and trimming!
lol i'm going to test fit the garage today after my son is done eating breakfast... also going to try moving the rack back a few inches.
I should fit in the garage. I measured about 8" of clearance and the top of the rack is about 6.5" above the roof.
Its going to be close when it snows! Changes the way the whole Jeep looks, and in a good way
2007 Jeep Commander: QTII, Leather, Sunroof, remote start, OEM Skid Plates, 2 in Daystar lift, 255.75.17 BFG Mud Terrains on Moabs, 1.25 " Spidertrax wheel spacers, 4x Guard front guard and Side Guards, Optima Red Top, Robbys half inch leveling spacer, Bilstein 5150 Rear Shocks, Pinch weld mod and trimming!
That is really clean, I like how close it is to the roof line & those mounts are great.
PJMJR508
(Happy Jeep)
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
